Siemens PN Series Load Centers - a high quality and feature-rich line of load center products designed to meet applications for virtually every need. The PN Series load center provides maximum flexibility in combination with labor saving features to aid the contractor while installing the product. PN Series load centers accept the plug-on neutral breakers, patented insta-wire neutral/ground system, convertibility, copper bussing and mounting tabs on the trim - these features were specifically engineered to decrease installation time and increase flexibility.

• Features siemens plug-on neutral, for simple quick installation, that is spacious with over 4 in. of wire bending space, and a secure reliable installation method
• PN Series plug-on neutral load center includes 2 factory installed ground bars
• Single phase load center
• Copper bus
• NEMA Type 1 enclosure
• Grey trim
• Interrupt rating: 100000 AIC
• UL Listed

The Siemens EQ 125 Amp 4-Space 8-Circuit Main Lug Indoor Load Center is single phase, 3 wire and rated for a maximum of 240-Volt and has a 100,000 Air. The center is NEMA Type 1 rated for indoor use. This product has a G90 hot-dipped, galvanized-carbon-steel enclosure that helps provide corrosion protection and an additional powder coating of polyester paint, using an electrostatic process, that enhances the corrosion protection and gives a great-looking finish, free of drips and runs.

• For use as a main lug load center
• NEMA type 1 rated for indoor use
• G90 hot-dipped, galvanized-carbon-steel enclosure helps provide corrosion protection
• Powder coating of polyester paint using electrostatic process enhances corrosion protection and gives a great-looking finish, free of drips and runs
• 1-piece aluminum buss bar is designed for use only with circuit breakers (not included)
• Single phase
• 3-wire
• 120/240 VAC
• 100,000 AIR
• ANSI certified and UL listed
• Surface mount
• Combination trim box in 1-package
• Positive load-side circuit-breaker hook rails
• Will not accommodate a double-pole GFCI or a circuit breaker with a shunt trip
• 100 Amp main breaker maximum (not included)

The Square D Electric Homeline Value Pack 200 Amp 30-Space 60-Circuit Indoor Convertible Main Breaker Load Center provides safety and value to contractors, remodelers or homeowners. It's built with a plated, aluminum bus bar that's compatible with Square D Homeline circuit breakers. These breaker boxes are designed for fast installation and wire savings. This breaker is fully distributed and UL listed for residential and commercial power distribution.

• Plug-On Neutral Design: Features a fully distributed neutral bar, allowing for the installation of Homeline plug-on neutral combination arc fault breakers in any space
• Wide Breaker Compatibility: Each pole space supports Square D Homeline full-size, tandem, or quad breakers, offering flexibility for your electrical setup
• Ground and Neutral Bar Capacity: Accepts up to (3) #10-14 equipment grounds for enhanced wiring versatility
• Value Pack Components: Includes (3) HOM120 Homeline 20 Amp single-pole circuit breakers, (2) HOM230 Homeline 30 Amp double-pole circuit breakers, and a combination flush/surface cover
• Supports Surge Protection: Accommodates a plug-on secondary surge arrestor (sold separately) for added electrical safety
• Overhead or Underground Feed: Install easily by rotating the device to match your feed type
• Single-Phase Indoor Main Breaker Panel: Designed for 120/240 VAC systems with a 22,000 AIR short circuit current rating
• Rated 120/240 VAC and 22,000 AIR short circuit current rating
• Automatic Flush Adjusting Cover: Reduces installation time with an easy-to-use, adjustable cover
• Straight-In Mains Design: Saves on expensive cable and reduces installation time
• Enhanced Wiring Flexibility: Distributed split branch neutral includes terminal screws backed out, offering up to 50% more terminals than UL standards require
• Rugged Thermoplastic Interior: Built with durable materials to withstand heavy use
• User-Friendly Screws: Slot/square drive screws allow for standard flat blade or square-head screwdrivers, ensuring proper torque
• Removable Interior for Security: Protects from damage or theft on the job site with a single captive screw for easy removal
• Customizable Ground Bar Locations: Three ground bar mounting locations (left, right, and end) for easy wiring access

Specially designed for easy installation, Eaton's CH load centers house the branch circuit breakers and the wiring required to distribute power to individual circuits. This panel is a main lug panel which is used as sub-panel to add circuits to an existing main breaker panel. Sub panels are often used in a garage, home addition, barn or storage shed and/or workshop. The branch breakers protect the wires leading to individual electrical loads such as fixtures and outlets. The CH8L125RP is a 125 Amp outdoor main lug with 8 spaces and 8 circuits.

• Amperage rating: 125
• Bus material: copper
• Rated NEMA 3R for outdoor use
• Feed type: overhead
• Number of circuits: 16
• Number of spaces: 8
• Phase: single-phase
• Voltage rating: 120/240
• Wire size: #6-1/0
• Tangential center knockout easier installation for conduit applications
• Steel back pan provides solid and reliable breaker mounting single piece design for stability and durability
• Single keyhole mounting - 1 keyhole at the top provides easier mounting and leveling
• Drywall marking on enclosure - indicates proper mounting depth for flush applications
• Used with: type CH breakers

The Square D by Schneider Electric Homeline Value Pack 200 Amp 40-Space 80-Circuit Indoor Convertible Main Breaker Qwik-Grip Load Center for Plug-on Neutral breakers includes a cover and a selection of breakers. It is UL listed for residential and commercial power distribution. This load center is built with a plated, aluminum bus bar that is tested and is compatible with Square D Homeline circuit breakers. Homeline load centers are designed for the value-minded contractors, remodelers, builders and homeowners. Square D Homeline breaker boxes are engineered for fast installation and wire savings.

• Square D Homeline 200 Amp 40-Space 80-Circuit Indoor Main Breaker Qwik-Grip Plug-On Neutral Load Center with Cover - Value Pack
• Innovative Qwik-Grip Design: Features a cable entry system that securely grips branch wires, eliminating the need for steel knockouts and cable connectors, ensuring faster and cleaner installations
• Plug-On Neutral Bar: Fully distributed neutral bar supports Homeline plug-on neutral combination arc fault breakers on any space, simplifying circuit customization
• Versatile Breaker Compatibility: Each pole space accepts full-size, tandem, or quad breakers for enhanced flexibility
• Ground and neutral bars accept up to (3) #10-14 equipment grounds flush/surface indoor cover
• Included Circuit Breakers: Includes (3) HOM120 20 Amp single-pole circuit breakers and (2) HOM230 30 Amp double-pole circuit breakers for added value and convenience
• Surge Protection Ready: Compatible with plug-on secondary surge arrestors (sold separately) to protect your electrical system
• Overhead or Underground Feed: Easily adaptable feed direction by rotating the device before installation
• Indoor Installation: Single-phase design rated at 120/240 VAC with a robust 22,000 AIR short circuit current rating
• Rated 120/240-Volt AC and 22,000 air short circuit current rating
• Automatic Flush Cover: Streamlined flush adjusting cover reduces installation time and effort
• Straight-In Mains Design: Saves on expensive cabling costs and reduces installation time
• Enhanced Wiring Flexibility: Distributed split branch neutral with pre-loosened terminal screws and up to 50% more terminals than UL requirements
• Durable and Reliable: Thermoplastic interior assembly ensures industry-leading ruggedness for long-lasting performance
• Easy Screw Installation: Slot/square drive screws accommodate both flat blade and square-head screwdrivers for proper torque and positive drive
• Theft-Resistant Interiors: Interiors can be quickly removed with a single captive screw for added protection during job site storage
• Customizable Grounding Options: Features 3 ground bar mounting locations (left, right, and end) for optimal wiring convenience

The Square D Homeline 125 Amp 24-Space 48-Circuit Indoor Convertible Main Breaker Load Center with cover for Plug-on Neutral breakers is UL listed for residential and commercial power distribution. This load center is built with a plated, aluminum bus bar that is tested and is compatible with Square D Homeline circuit breakers. Homeline load centers are designed for the value-minded contractors, remodelers, builders and homeowners. Square D Homeline breaker boxes are engineered for fast installation and wire savings.

• Square D Homeline 125 Amp 24-Space 48-Circuit Indoor Main Breaker Plug-On Neutral Load Center with Cover
• Includes a fully distributed neutral bar, allowing for the installation of Homeline plug-on neutral combination arc fault breakers on any space
• Each pole space accepts full-size, tandem or quad breakers
• Ground and neutral bars accept up to (3) #10-14 equipment grounds
• Includes a combination flush/surface indoor cover
• Accommodates plug-on secondary surge arrestor (sold separately)
• Overhead/underground feed simply by rotating the device before installing
• Single phase, NEMA 1 rating for indoor use
• Rated 120/240 VAC and 22,000 AIR short circuit current rating
• Automatic flush adjusting cover requires less time to complete the job
• Designed with straight-in mains to save expensive cable and time
• Distributed split branch neutral with terminal screws backed out offering with up to 50% more terminals than UL requires increases wiring flexibility saving installation time and simplifies wiring
• Thermoplastic interior assembly is among the most rugged in the industry
• Slot/square drive screws let you use either standard flat blade screwdriver or square-head driver for positive drive and proper torque
• For protection from damage or theft on the job site, interiors can be easily removed with a single captive screw
• 3-ground bar mounting locations (left, right and end) let you pick the easiest spot to wire

The Square D Homeline Value Pack 225 Amp 30-Space 60-Circuit Indoor Convertible Main Lugs Load Center for Plug-on Neutral breakers includes the cover, a selection of breakers and a ground bar. It is UL listed for residential and commercial power distribution. This load center is built with a plated, aluminum bus bar that is tested and is compatible with Square D Homeline circuit breakers. Homeline load centers are designed for the value-minded contractors, remodelers, builders and homeowners. Square D Homeline breaker boxes are engineered for fast installation and wire savings.

• Square D Homeline 225 Amp 30-Space 60-Circuit Indoor Main Lug Plug-On Neutral Load Center with Cover, Ground Bar - Value Pack
• Includes a fully distributed neutral bar, allowing for the installation of Homeline plug-on neutral breakers on any space
• Each pole space accepts full-size, tandem or quad breakers
• Ground and neutral bars accept up to (3) #10-14 equipment grounds
• Includes PKGTALP2 ground bar kit (PK9GTA and PK18GTAL) and (3) HOM120 Home line 20 Amp single-pole circuit breakers, (2) HOM230 Homeline 30 Amp double-pole circuit breakers and a combination flush/surface cover
• Accommodates plug-on secondary surge arrestor (sold separately)
• Overhead/underground feed simply by rotating the device before installing
• Single phase
• Rated 120/240 VAC and 65,000 AIR short circuit current rating
• Automatic flush adjusting cover requires less time to complete the job
• Designed with straight-in mains to save expensive cable and time
• Distributed split branch neutral with terminal screws backed out offering with up to 50% more terminals than UL requires increases wiring flexibility saving installation time and simplifies wiring
• Thermoplastic interior assembly is among the most rugged in the industry
• Slot/square drive screws let you use either standard flat blade screwdriver or square-head driver for positive drive and proper torque
• For protection from damage or theft on the job site, interiors can be easily removed with a single captive screw
• 2-equipment ground bars are factory-included for field mounting in 3 locations (left, right and end) letting you pick the easiest spot to wire

Siemens PN Series Load Centers - a high quality and feature-rich line of load center products designed to meet applications for virtually every need. The PN Series load center provides maximum flexibility in combination with labor saving features to aid the contractor while installing the product. PN Series load centers accept the plug-on neutral breakers, patented insta-wire neutral/ground system, convertibility, copper bussing and mounting tabs on the trim - these features were specifically engineered to decrease installation time and increase flexibility.

• Features siemens plug-on neutral, for simple quick installation, that is spacious with over 4 in. of wire bending space, and a secure reliable installation method
• PN Series plug-on neutral load center includes 2 factory installed ground bars
• Single phase load center
• Tin plated copper bus
• NEMA Type 3R enclosure
• Grey trim
• Interrupt rating: 100000 AIC
• UL Listed

The Square D Homeline 125 Amp 24-Space 48-Circuit Indoor Convertible Main Lugs Load Center with cover for Plug-on Neutral breakers includes a ground bar and is UL listed for residential and commercial power distribution. This load center is built with a plated, aluminum bus bar that is tested and listed only for Homeline circuit breakers. Homeline load centers are designed for the value-minded contractors, remodelers, builders and homeowners. Homeline load centers are engineered for fast installation and wire savings.

• Includes a fully distributed neutral bar, allowing for the installation of Homeline plug-on neutral combination arc fault breakers on any space
• Each pole space accepts full-size, tandem or quad breakers
• Ground and neutral bars accept up to (3) #10-14 equipment grounds
• Includes a PK15GTAL ground bar, a combination flush/surface cover and is convertible to main breaker load center with a QOM1 main breaker (sold separately)
• Accommodates plug-on secondary surge arrestor (sold separately)
• Overhead/underground feed simply by rotating the device before installing
• Single phase
• Rated 120/240 VAC and 65,000 air short circuit current rating
• Automatic flush adjusting cover requires less time to complete the job
• Designed with straight-in mains to save expensive cable and time
• Distributed split branch neutral with terminal screws backed out offering with up to 50% more terminals than UL requires increases wiring flexibility saving installation time and simplifies wiring
• Thermoplastic interior assembly is among the most rugged in the industry
• Slot/square drive screws let you use either standard flat blade screwdriver or square-head driver for positive drive and proper torque
• For protection from damage or theft on the job site, interiors can be easily removed with a single captive screw
• 2-equipment ground bars are factory-included for field mounting in 3 locations (left, right and end) letting you pick the easiest spot to wire

Siemens SN Series Load Center is the smart choice when value and quick installation are of highest priority. The SN Series load centers include labor saving features such as the ability to accept Plug-on neutral breakers, patented Insta-wire and mounting trim tabs. These exclusive features make the SN Series load center the best load center for the value minded contractor.

• Features Siemens plug-on neutral, for simple quick installation, that is spacious with over 4 in. of wire bending space, and a secure reliable installation method
• SN series plug-on neutral load center includes 1 factory installed ground bars
• Single phase load center
• Aluminum bus
• NEMA type 1 enclosure
• Grey trim
• Interrupt rating: 100000 AIC
• UL Listed

Leviton is proud to bring the Load Center into the 21st century with a focus on improved safety and ease of installation. Thanks to its revolutionary design, all hot and neutral wires terminate at custom lugs in the panel, rather than at the circuit breaker*, which allows the entire panel to be wired at rough-in. Branch circuit breakers are simply plugged-in at final installation, increasing jobsite efficiency. Leviton solar-ready all-in-one load centers feature over-under semi-flush construction, and provide a meter socket, main breaker, and a selection of size configurations in one easy to install unit to meet the needs of any job.

• EASY - The Load Center can be wired without any breakers present
• SUPERIOR CONDUCTIVITY - Comes standard with tin plated copper bus
• SOLAR READY - California Title-24 Compliant
• UTILITY REQUIREMENT - EUSERC Approved

The Eaton Cutler-Hammer Type-BR Circuit Breaker Filler Plates allows you to cover unused spaces in a load center. This ensures that the live space is closed off. It is UL safety listed.

• Covers unused spaces in a load center
• For use with cutler-hammer type-BR load centers
• 1 in. plate for branch breaker slots
• UL listings

These 1 in. Load-Center Filler Plates (5-Pack) are used to fill empty spaces in a load center after the circuit breakers have been removed. The plates are ANSI certified. The plates are CSA and UL Listed.

• Use to fill empty circuit-breaker positions
• Compatible with a 1 in. load center space
• Bag contains 5 filler plates
• ANSI certified and CSA and UL Listed

Specially designed for easy installation, Eaton's CH plug on neutral load centers house the branch circuit breakers and the wiring required to distribute power to individual circuits. This is a convertible type load center. It can either be used as a main lug or main breaker load center. In addition to the load center a cover and either a main breaker kit or main lug kit must be purchased. The branch breakers protect the wires leading to individual electrical loads such as fixtures and outlets.

• Amperage rating: 225 Amp
• Bus material: copper
• Rated NEMA 1 for indoor use
• Feed type: overhead or underground

Siemens PN Series Load Centers - a high quality and feature-rich line of load center products designed to meet applications for virtually every need. The PN Series load center provides maximum flexibility in combination with labor saving features to aid the contractor while installing the product. PN Series load centers accept the plug-on neutral breakers, patented insta-wire neutral/ground system, convertibility, copper bussing and mounting tabs on the trim - these features were specifically engineered to decrease installation time and increase flexibility.

• Features siemens plug-on neutral, for simple quick installation, that is spacious with over 4 in. of wire bending space, and a secure reliable installation method
• PN Series plug-on neutral load center includes 2 factory installed ground bars
• Single phase load center
• Tin plated copper bus
• NEMA Type 3R enclosure
• Grey trim/ feed thru lugs
• Interrupt rating: 22000 AIC
• UL Listed

Siemens SN Series Load Center is the smart choice when value and quick installation are of highest priority. The SN Series load centers include labor saving features such as the ability to accept Plug-on neutral breakers, patented Insta-wire and mounting trim tabs. These exclusive features make the SN Series load center the best load center for the value minded contractor.

• Features Siemens plug-on neutral, for simple quick installation, that is spacious with over 4 in. of wire bending space, and a secure reliable installation method
• SN series plug-on neutral load center includes 1 factory installed ground bars
• Single phase load center
• Aluminum bus
• NEMA type 3R enclosure
• Grey trim/ feed thru lugs
• Interrupt rating: 22000 AIC
• UL Listed

Specially designed for easy installation, Eaton's BR load centers house the branch circuit breakers and the wiring required to distribute power to individual circuits. This panel is a main lug panel which is used as sub-panel to add circuits to an existing main breaker panel. Sub panels are often used in a garage, home addition, barn or storage shed and/or workshop. The branch breakers protect the wires leading to individual electrical loads such as fixtures and outlets. The BR48L125RP is a 125 Amp outdoor main lug with 4 spaces and 8 circuits.

• Amperage rating: 125 Amp
• Bus material: aluminum
• Rated NEMA 3R for outdoor use
• Interrupt rating: 10 kAIC
• Mounting: combination
• Number of circuits: 8
• Number of spaces: 4
• Phase: single-phase
• Voltage rating: 120/240-Volt
• Wire size: #14-1/0 AWG Cu/Al at 60 degree C or 75 degree C
• Tangential center knockout easier installation for conduit applications
• Steel back pan provides solid and reliable breaker mounting single piece design for stability and durability
• Single keyhole mounting - provides easier mounting and leveling
• Drywall marking on enclosure - indicates proper mounting depth for flush applications
• Used with: type BR breakers

EQ type load centers with main lugs feature a combination trim box in one package. Spa Panels are ideal for outdoor applications requiring the use of ground fault protection, such as hot tubs. A factory installed 2-Pole GFCI breaker is provided, along with 2 extra circuits.

• Factory installed Siemens 2-pole 50 Amp GFCI circuit breaker (QF250P)
• 2 extra spaces for branch circuits
• Interiors offer removal in seconds
• Single phase
• 1 piece bus bar construction designed for use only with circuit breakers
• UL listed on 60/75C conductors
• Positive load side circuit breaker hook rails
• Factory installed 5 position ground bar
• Uses HS type hubs
• NEMA type 3R: enclosure is intended for outdoor use primarily to provide a degree of protection against falling rain and sleet and must remain undamaged by the formation or ice on the enclosure; they are not intended to provide protection against conditions such as dust, internal condensation, or internal icing

Specially designed for easy installation, Eaton's BR load centers house the branch circuit breakers and the wiring required to distribute power to individual circuits. This panel is a main lug panel which is used as sub-panel to add circuits to an existing main breaker panel. Sub panels are often used in a garage, home addition, barn or storage shed and/or workshop. The branch breakers protect the wires leading to individual electrical loads such as fixtures and outlets. The BR816L125RP is a 125 Amp outdoor main lug with 8-spaces and 16-circuits.

• Amperage rating: 125 Amp
• Bus material: aluminum
• Rated NEMA 3R for outdoor use
• Interrupt rating: 10 kAIC
• Mounting: combination
• Number of circuits: 16
• Number of spaces: 8
• Phase: single-phase
• Voltage rating: 120/240-Volt
• Wire size: #14-1/0 AWG Cu/Al at 60 degree C or 75 degree C
• Tangential center knockout easier installation for conduit applications
• Steel back pan provides solid and reliable breaker mounting single piece design for stability and durability
• Single keyhole mounting - one keyhole at the top provides easier mounting and leveling
• Drywall marking on enclosure - indicates proper mounting depth for flush applications
• Used with: type BR breakers

This is a Type CH combination cover for select Type CH surge ready loadcenters. Eatons Type CH 3/4 in. load centers enclose CH breakers for power distribution and circuit protection in residential and light commercial applications. This loadcenter cover is rated NEMA 1 for indoor use.

• Combination cover for type CH surge loadcenters
• Cover is rated nema 1 for indoor use
• Please refer to the compatibility chart for Type CH loadcenters this cover will fit
• Type CH products have a lifetime limited warranty

The Square D Homeline 200 Amp 30-Space 42-Circuit Outdoor Surface Mount Solar-Ready Combination Meter Socket and Main Breaker Load Center for Plug-on Neutral breakers is UL listed for residential and commercial power distribution. This combination service entrance device (CSED) is built with a plated, aluminum bus bar that is tested and is compatible with Square D Homeline circuit breakers. Homeline CSEDs are designed for the value-minded contractors, remodelers, builders and homeowners. Homeline CSEDs are engineered for fast installation and wire savings.

• Square D Homeline 200 Amp 30-Space 42-Circuit Outdoor Ring-Type Surface Mount Solar-Ready Main Breaker Plug-On Neutral CSED
• Includes a fully distributed neutral bar, allowing for the installation of Homeline plug-on neutral combination arc fault and dual function breakers on any space
• Solar-ready for new or future installations with provisions for field-installed CTs on line bus
• Accepts solar ready sub-feed lug kit SR69064A for solar connections ahead of the main breaker
• Meets EUSERC specifications
• Factory-installed 200 Amp main breaker
• Rated 120/240 VAC and 22,000 AIR short circuit current rating
• Ground and neutral bars accept up to (3) #10-14 equipment grounds
• 4 jaw ring type meter socket
• Surface mount NEMA type 3R enclosure for outdoor installation
• Accommodates plug-on secondary surge arrestor, and features a plug-in design for easy installation
• Thermoplastic interior assembly is among the most rugged in the industry
• Slot/square drive screws let you use either standard flat blade screwdriver or square-head driver for positive drive and proper torque
• Bypass type-none
• UL Listed and ANSI certified

The Square D by Schneider Electric QO 100 Amp Outdoor Circuit Breaker Enclosure includes a two-pole QO2100 circuit breaker for use as an exterior disconnect. This breaker box is suitable for use as service entrance equipment for compliance up to 2017 NEC code and is rated Type-3R for outdoor use. This enclosure accepts a B-Hub for top feed applications (sold separately). For non-service entrance equipment applications, ground bar PKOGTA-2 may be required and is sold separately. This breaker box is compatible with Square D QO 2-pole circuit breakers.

• Square D QO 100 Amp two-pole outdoor circuit breaker enclosure with QO2100 breaker included
• PKOGTA-2 ground bar kit and B-hubs sold separately
• Not for use with single-pole QO breakers
• Includes (1) Square D QO2100 QO 100 Amp double-pole circuit breaker, 10 kA interruption rating
• Type-3R enclosure for outdoor use
• Single-phase, 100 Amp, 120/240-Volt AC rated
• 2-1/2 in. type-B hub on the top and a 1-1/2 in. maximum knockout on the bottom
• Surface mountable for easy installation
• ANSI certified and UL Listed
• For installation as entrance device to comply with code up to 2017 NEC Code

Siemens PN Series Load Centers - a high quality and feature-rich line of load center products designed to meet applications for virtually every need. The PN Series load center provides maximum flexibility in combination with labor saving features to aid the contractor while installing the product. PN Series load centers accept the plug-on neutral breakers, patented insta-wire neutral/ground system, convertibility, copper bussing and mounting tabs on the trim - these features were specifically engineered to decrease installation time and increase flexibility.

• Features siemens plug-on neutral, for simple quick installation, that is spacious with over 4 in. of wire bending space, and a secure reliable installation method
• PN Series plug-on neutral load center includes 2 factory installed ground bars
• Single phase load center
• Tin plated copper bus
• NEMA Type 3R enclosure
• Grey trim
• Interrupt rating: 100000 AIC
• UL Listed

Siemens PN Series Load Centers - a high quality and feature-rich line of load center products designed to meet applications for virtually every need. The PN Series load center provides maximum flexibility in combination with labor saving features to aid the contractor while installing the product. PN Series load centers accept the plug-on neutral breakers, patented insta-wire neutral/ground system, convertibility, copper bussing and mounting tabs on the trim - these features were specifically engineered to decrease installation time and increase flexibility.

• Features siemens plug-on neutral, for simple quick installation, that is spacious with over 4 in. of wire bending space, and a secure reliable installation method
• PN Series plug-on neutral load center includes 2 factory installed ground bars
• Single phase load center
• Tin plated copper bus
• NEMA Type 1 enclosure
• Grey trim
• Interrupt rating: 100000 AIC
• UL Listed

This Collar Strap for Siemens Ground Bars is ANSI certified and CSA and UL listed. The collar strap is designed for use with #12-2/0 AWG copper/aluminum wire. This is intended for use as a collar strap for a Siemens ground bar.

• For use as a collar strap for a Siemens ground bar
• Accepts #12-2/0 AWG copper/aluminum wire
• Compatible with Siemens products
• ANSI certified and CSA and UL listed

Leviton is proud to bring the Load Center into the 21st century with a focus on improved safety and ease of installation. Thanks to its revolutionary design, all hot and neutral wires terminate at custom lugs in the panel, rather than at the circuit breaker*, which allows the entire panel to be wired at rough-in. Branch circuit breakers are simply plugged-in at final installation, increasing jobsite efficiency. Available in a variety of sizes and configurations, Leviton offers a complete portfolio of Load Centers to meet the needs of any job.

• EASY - The Load Center can be wired without any breakers present
• SUPERIOR CONDUCTIVITY - Comes standard with tin plated copper bus
• ORGANIZED - Notches for cable ties promote secure and neat wiring
• MODERN DESIGN - White powder coated finish for a sleek appearance

Specially designed for easy installation, Eaton's CH plug on neutral load centers house the branch circuit breakers and the wiring required to distribute power to individual circuits. This is a convertible main load center. The branch breakers protect the wires leading to individual electrical loads such as fixtures and outlets.

• Amperage rating: 200 Amp
• Bus material: copper
• Rated NEMA 3R for outdoor use
• Feed type: overhead or underground

Specially designed for easy installation, Eaton's CH plug on neutral load centers house the branch circuit breakers and the wiring required to distribute power to individual circuits. This is a convertible main load center. The branch breakers protect the wires leading to individual electrical loads such as fixtures and outlets.

• Amperage rating: 225 Amp
• Bus material: copper
• Rated NEMA 3r for outdoor use
• Feed type: overhead or underground

Specially designed for easy installation, Eaton's BR load centers house the branch circuit breakers and the wiring required to distribute power to individual circuits. This panel is a main lug panel which is used as sub-panel to add circuits to an existing main breaker panel. Sub panels are often used in a garage, home addition, barn or storage shed and/or workshop. The branch breakers protect the wires leading to individual electrical loads such as fixtures and outlets. The BR48L125SP is a 125 Amp main lug with 4-spaces and 8-circuits.

• Amperage rating: 125 Amp
• Bus material: aluminum
• Rated NEMA 1 for indoor use
• Interrupt rating: 10 kAIC
• Mounting: surface
• Number of circuits: 8
• Number of spaces: 4
• Phase: single-phase
• Voltage rating: 120/240-Volt
• Wire size: #14-1/0 AWG Cu/Al at 60 degree C or 75 degree C
• Tangential center knockout easier installation for conduit applications
• Steel back pan provides solid and reliable breaker mounting single piece design for stability and durability
• Single keyhole mounting - provides easier mounting and leveling
• Drywall marking on enclosure - indicates proper mounting depth for flush applications
• Used with: type BR breakers

Siemens PN Series Load Centers - a high quality and feature-rich line of load center products designed to meet applications for virtually every need. The PN Series load center provides maximum flexibility in combination with labor saving features to aid the contractor while installing the product. PN Series load centers accept the plug-on neutral breakers, patented insta-wire neutral/ground system, convertibility, copper bussing and mounting tabs on the trim - these features were specifically engineered to decrease installation time and increase flexibility.

• Features siemens plug-on neutral, for simple quick installation, that is spacious with over 4 in. of wire bending space, and a secure reliable installation method
• PN Series plug-on neutral load center includes 2 factory installed ground bars
• Single phase load center
• Tin plated copper bus
• NEMA Type 1 enclosure
• Grey trim
• Interrupt rating: 22000 AIC
• UL Listed

Siemens PN Series Load Centers - a high quality and feature-rich line of load center products designed to meet applications for virtually every need. The PN Series load center provides maximum flexibility in combination with labor saving features to aid the contractor while installing the product. PN Series load centers accept the plug-on neutral breakers, patented insta-wire neutral/ground system, convertibility, copper bussing and mounting tabs on the trim - these features were specifically engineered to decrease installation time and increase flexibility.

• Features Siemens plug-on neutral, for simple quick installation, that is spacious with over 4 in. of wire bending space, and a secure reliable installation method
• PN Series plug-on neutral load center includes 2 factory installed ground bars
• Single phase load center
• Tin plated copper bus
• NEMA Type 3R enclosure
• Grey trim
• Interrupt rating: 100000 AIC
• UL Listed

This 125 Amp Double-Pole Main Breaker Conversion Kit is designed to convert a main lug load center into a main breaker load center. The breaker has a maximum load of 240-Volt and is suitable for use in 125 Amp load centers. This ANSI-certified and CSA and UL-listed converter is compatible for use in both Murray and Siemens' Ultimate Load Centers. Allows for a means of disconnect in a single switch for all circuits in your Siemens Load Center.

• Use to convert a main lug load center to a main breaker load center
• Bolt on main breaker designed for use in ultimate load centers
• Interrupting rating of 22KA 120/240V AC
• ANSI certified and CSA and UL listed

Eaton's Cutler-Hammer Type CH Load centers (also known as a breaker box) include a 1-piece copper bus. This absence of bolted connections virtually eliminates the chance of hot spots or faults, ensuring a longer product life. Our standard 14-3/8 in. W enclosures fit snugly between wall studs. A variety of knockouts allows for more wiring configurations, while predrilled mounting holes provide easy installation of additional ground bars, if desired. Type CH Load centers have a lifetime warranty and accept Cutler-Hammer Type CH (3/4 in.) breakers.

• 42-space
• 200 Amp
• NEMA 3R outdoor
• Limited lifetime warranty

This is a Type CH loadcenter cover for select Type CH loadcenters. Eaton's Type CH 3/4 in. load centers enclose CH breakers for power distribution and circuit protection in residential and light commercial applications. This loadcenter cover is sandalwood colored to match the CH panel.

• Indoor covers for Eaton's type CH loadcenters are ordered separately
• Type CH loadcenters and covers are sandalwood colored
• All trims are finished using an electrostatic powder coat, baked urethane paint process
• Eaton's CH loadcenters include a limited lifetime warranty

The Square D Homeline 200 Amp 8-Space 16-Circuit Outdoor Convertible Main Breaker Load Center for Plug-on Neutral breakers has feed-thru lugs and is UL listed for residential and commercial power distribution. This load center is built with a plated, aluminum bus bar that is tested and is compatible with Square D Homeline circuit breakers. Homeline load centers are designed for the value-minded contractors, remodelers, builders and homeowners. Square D Homeline breaker boxes are engineered for fast installation and wire savings.

• Square D Homeline 200 Amp 8-Space 16-Circuit Outdoor Main Breaker Load Center with Feed-Thru Lug
• Includes a fully distributed neutral bar, allowing for the installation of Homeline plug-on neutral combination arc fault breakers on any space
• Each pole space accepts full-size, tandem or quad Square D Homeline breakers
• Ground and neutral bars accept up to (3) #10-14 equipment grounds
• Includes feed-thru lugs and a rainproof outdoor cover
• Accommodates plug-on secondary surge arrestor (sold separately)
• Main feeders terminate from the top, feeders can enter from any direction, however, device cannot be rotated
• Single phase, for outdoor installation
• Rated 120/240 VAC and 22,000 AIR short circuit current rating
• Rainproof cover features a stainless steel hasp that is easily padlocked for safety from theft
• Designed with straight-in mains to save expensive cable and time
• Distributed split branch neutral with terminal screws backed out offering with up to 50% more terminals than UL requires increases wiring flexibility saving installation time and simplifies wiring
• Thermoplastic interior assembly is among the most rugged in the industry
• Slot/square drive screws let you use either standard flat blade screwdriver or square-head driver for positive drive and proper torque
• For protection from damage or theft on the job site, interiors can be easily removed with a single captive screw
• 3-ground bar mounting locations (left, right and end) let you pick the easiest spot to wire

Reliable product from the technology leader. Technology enabling reliability. When it comes to ready availability, easy installation and fewer callbacks, you need a manufacturer you can trust. Our products and systems are engineered to take on the most demanding conditions, always service and maintenance network, complete support is always there.

• Use these trim screws for Siemens and Murray load centers (6-pack) to secure a panel door to a load center enclosure, for safety, these trim screws are UL listed and ANSI certified
• Unit if for use with Siemens and Murray load centers with an SC REF hole
• Unit is a trim screw for Siemens and Murray load center use
• Unit is ANSI certified and UL listed

Specially designed for easy installation, Eaton's BR 1-inch loadcenters house the branch circuit breakers and the wiring required to distribute power to individual circuits. They serve as main breaker for service entrances or as main lug when adding circuits to existing service. The main breaker protects the entire panel and can be used as a service disconnect. The branch breakers protect the wires leading to individual electrical loads such as fixtures and outlets.

• Amperage rating: 200 Amp
• Cover: cover included
• Enclosure: NEMA 3R
• Interrupt rating: 22 kAIC
• Bus material: aluminum
• Used with: type BR 1 in. breakers
• BR type plug-on neutral breaker box eliminates the pigtail connection providing time and labor savings
• Dedicated neutral bus for breaker connection
• In-board neutral bar increases gutter space to allow for professional installation of conductors
• Backed out neutral screws allows for quick connection of neutral and ground conductors
• Optimized knockout locations for additional access and easier to remove
• Self-leveling tabs allow for quick drywall offset and helps simplify installation
• Keyhole hanging feature allows for ease of cover installation for both top and bottom feed applications
• Rigid cover spine provides strength when twist outs are removed allowing for easier removal
• Eaton offers a full line of circuit breakers to meet all your protection needs including arc fault, ground fault, dual function and surge protection

The Square D 200 Amp 8-Space 16-Circuit Outdoor Combination meter Socket and Main Breaker Load Center is suitable for use as a combination service entrance device (CSED). This unit is ANSI certified and UL listed with a maximum 22,000 AIR. The combination service entrance device features a Ringless meter cover with a single-phase, 4-jaw meter socket. It is suitable for overhead or underground service applications. Meets EUSERC Specifications. Surface mount or convertible to semi-flush with appropriate flange kit. This CSED is built with a plated, aluminum bus bar that is tested and is compatible with Square D Homeline circuit breakers. Square D Homeline CSEDs are designed for the value-minded contractors, remodelers, builders and homeowners. Homeline CSEDs are engineered for fast installation and wire savings.

• Versatile Service Entrance Equipment: Square D Homeline 200 Amp 8-Space 16-Circuit Ringless Main Breaker Combination Service Entrance Device (CSED) is suitable for use as service entrance equipment
• Suitable for use as service entrance equipment
• Surge Protection Ready: Accommodates plug-on secondary surge arrestors with a plug-in design for quick and easy installation
• Ringless Design for Simplicity: Features a ringless configuration with no bypass for streamlined operation
• Exclusive Homeline Breaker Compatibility: Designed for use with Square D Homeline breakers only, ensuring seamless integration
• Durable Outdoor Enclosure: NEMA Type 3R-rated enclosure ensures reliable performance in outdoor applications
• Integrated 4-Jaw Meter Socket: Includes a 4-jaw meter socket as part of the design for added convenience
• Straight-In Mains Design: Saves time and reduces costs by allowing straight-in cable connections
• Rugged Thermoplastic Assembly: Thermoplastic interior assembly offers industry-leading durability and long-lasting performance
• Convenient Screw Design: Slot/square drive screws allow use with both flat blade and square-head screwdrivers for secure and precise installation
• Certified for Safety: UL Listed and ANSI certified to meet industry safety standards

Quick, easy and clean describe the new plug-on neutral design attributes offered by Eaton. Time saving features offer a quick installation equating to less time on the job. Designed to maximize installation efficiency and to provide additional convenience allowing for an easy installation. New features that help ensure an aesthetically clean and professional installation.

• Amperage rating: 100 Amp
• Cover: cover included
• Enclosure: NEMA 1
• Interrupt rating: 10 kAIC
• Bus material: aluminum
• Used with: type BR 1 in. breakers
• BR type plug-on neutral breaker box eliminates the pigtail connection providing time and labor savings
• Dedicated neutral bus for breaker connection
• In-board neutral bar increases gutter space to allow for professional installation of conductors
• Backed out neutral screws allows for quick connection of neutral and ground conductors
• Optimized knockout locations for additional access and easier to remove
• Self-leveling tabs allow for quick drywall offset and helps simplify installation
• Keyhole hanging feature allows for ease of cover installation for both top and bottom feed applications
• Rigid cover spine provides strength when twist outs are removed allowing for easier removal
• Eaton offers a full line of circuit breakers to meet all your protection needs including arc fault, ground fault, dual function and surge protection

The Square D Homeline 70 Amp 2-Space 4-Circuit Outdoor Main Lugs Load Center is UL listed for residential and commercial power distribution. This load center is built with a plated, aluminum bus bar that is tested and is compatible with Square D Homeline circuit breakers. Homeline load centers are designed for the value-minded contractors, remodelers, builders and homeowners. Square D Homeline breaker boxes are engineered for fast installation and wire savings.

• Square D Homeline 70 Amp 2-Space 4-Circuit Outdoor Main Lug Load Center
• Includes a rainproof outdoor cover, and is for use as a main lug load center in fixed applications
• Accommodates plug-on secondary surge arrestor (sold separately)
• Main feeders terminate from the top, feeders can enter from any direction, however, device cannot be rotated
• Knockouts located on all sides of breaker box to ease wire installation
• Single phase, for outdoor installation
• Rated 120/240 VAC and 10,000 AIR short circuit current rating
• Rainproof cover features a stainless steel hasp that is easily padlocked for safety from theft
• Thermoplastic interior assembly is among the most rugged in the industry
• Slot/square drive screws let you use either standard flat blade screwdriver or square-head driver for positive drive and proper torque

The Siemens Industry, Inc. EQ 125 Amp 8-Space 16-Circuit Indoor Main Lug Load Center has a flush-mount design and is NEMA 1R rated for indoor use. The load center is a single-phase, 3-wire unit with an aluminum buss bar for excellent conductivity. This load center is ANSI certified and UL listed with a rating of up to 240-Volt.

• Type-G90, hot-dipped galvanized carbon steel enclosure provides corrosion protection
• Aluminum bus bar
• Interiors offer removal in seconds
• 1-piece bus bar construction designed for use with circuit breakers
• Positive load side circuit breaker hook rails
• Ideal for sub-feed applications
• Flush mount
• 120/240 VAC

Siemens PN Series Load Centers - a high quality and feature-rich line of load center products designed to meet applications for virtually every need. The PN Series load center provides maximum flexibility in combination with labor saving features to aid the contractor while installing the product. PN Series load centers accept the plug-on neutral breakers, patented insta-wire neutral/ground system, convertibility, copper bussing and mounting tabs on the trim - these features were specifically engineered to decrease installation time and increase flexibility.

• Features siemens plug-on neutral, for simple quick installation, that is spacious with over 4 in. of wire bending space, and a secure reliable installation method
• PN Series plug-on neutral load center includes 2 factory installed ground bars
• Single phase load center
• Tin plated copper bus
• NEMA Type 1 enclosure
• Grey trim
• Interrupt rating: 22000 AIC
• UL Listed

Siemens SN Series Load Center is the smart choice when value and quick installation are of highest priority. The SN Series load centers include labor saving features such as the ability to accept Plug-on neutral breakers, patented Insta-wire and mounting trim tabs. These exclusive features make the SN Series load center the best load center for the value minded contractor. It includes three Q120 1-Pole 20A and one Q230 2-Pole 30A breakers. It is spacious with over 4 inches of wire bending space. The sturdy hook-rail and reliable connection improves its security.

• Features siemens plug-on neutral, for simple quick installation, that is spacious with over 4 in. of wire bending space, and a secure reliable installation method
• SN Series plug-on neutral load center includes 1 factory installed ground bars
• Single phase load center
• Aluminum bus
• NEMA Type 1 enclosure
• Grey trim/ value pack
• Interrupt rating: 22000 AIC
• UL Listed

Siemens SN Series Load Center is the smart choice when value and quick installation are of highest priority. The SN Series load centers include labor saving features such as the ability to accept Plug-on neutral breakers, patented Insta-wire and mounting trim tabs. These exclusive features make the SN Series load center the best load center for the value minded contractor.

• Features Siemens plug-on neutral, for simple quick installation, that is spacious with over 4 in. of wire bending space, and a secure reliable installation method
• SN Series plug-on neutral load center includes 1 factory installed ground bars
• Single phase load center
• Aluminum bus
• NEMA type 1 enclosure
• Grey trim
• Interrupt rating: 100000 AIC
• UL Listed

The Siemens 200 Amp 8-Space 16-Circuit Outdoor Combination Main Breaker/Meter Socket Load Center surface mounts and provides NEMA Type 3R protection. These combos feature a cost effective construction that is preferable in non-EUSERC areas. Contact local utility to confirm meter socket placement priorto installation.

• Suitable for use only as service entrance equipment
• Over-Under construction; Surface Mount; Feed Thru Lugs included
• For Overhead or Underground feed applications
• 1-phase, 3-wire 120/240V AC
• Ring Meter Type; No Bypass
• Pad locking provisions on all devices
• UL Listed, 22,000 AIC rated
• NEMA Type 3R Outdoor Enclosure

This Siemens Renovation Panel is the smart choice for contractors when value and quick installation are of highest priority. This EQ series Value Pack Load center feature copper bussing, 10-year warranty, 100% neutrals, 3 Q120U circuit breakers and 1 Q230U circuit breaker and the ground bar is now included. Ideal for older home renovation projects where the distance between the studs is narrower than current construction practices. The narrower panel eliminates the need to 'notch' out the existing studs.

• 100A, 10 spaces, 20 circuits, main breaker
• Includes (2) Q115U and (1) Q230U circuit breakers and ground bar
• Solid copper bus bar construction
• Ideal for subfeed applications
• EQ series small circuit panel
• Main breaker and ECGB10 ground bar factory installed
• NEMA type 1: enclosure is intended for indoor use primarily to provide protection against contact with the enclosed equipment in locations where unusual service conditions do not exist
• UL listed

This 200 Amp 4-Space 4-Circuit Outdoor Mobile Home Main Breaker is convertible from main lug to main breaker and vice versa and offers additional breaker positions to allow connection of external circuits such as lights and pumps. This main breaker contains a highly conductive copper buss bar along with Insta-wire neutrals, ground and circuit breakers that help provide quick conductor connections. UL listed for use as service entrance equipment.

• Ideal for serving mobile homes located on private lots and offers additional breaker positions to allow connection of external circuits such as lights and pumps
• Type-G90, hot-dipped galvanized carbon steel enclosure provides corrosion protection
• Copper buss bar for excellent conductivity
• Interiors offer removal in seconds
• 1-piece bus bar construction designed for use with circuit breakers
• Positive load side circuit breaker hook rails
• 2 in. HS type hub included
• Type QNR main breaker factory installed
• Ideal for sub-feed applications

This is a Type CH loadcenter cover for select Type CH loadcenters. Eaton's Type CH 3/4 in. load centers enclose CH breakers for power distribution and circuit protection in residential and light commercial applications. This loadcenter cover is sandalwood colored to match the CH panel.

• Indoor covers for Eaton's type CH loadcenters are ordered separately
• Type CH loadcenters and covers are sandalwood colored
• All trims are finished using an electrostatic powder coat, baked urethane paint process
• Eaton's CH loadcenters include a limited lifetime warranty