1/4 in. Turn Chrome Plated Lead Free Supply Stop. Available in straight and angle configurations with a combination of IPS, sweat and compression connections. 1-piece machined brass construction which is suitable for use in both hot and cold water applications. Available in chrome, polished brass and rough brass finishes.

• Forged brass body for durability
• Chrome plated finish offers decorative appearance
• Ball valve design provides reliable shut-off and re-opening
• IAPMO and CSA listed
• Certified to ANSI/NSF standard 61-9 annex G
• Manufactured in an ISO accredited facility

The Homewerks 1/2" NOM Comp x 3/8" OD Comp Multi-Turn Angle Shut Off Valve controls water flow to a plumbing fixture. It is used where the water pipe enters the room to allow for easy shut-off of water flow to the end fixture without having to turn water off to the entire home.The brass construction is durable and corrosion-resistant. Bring quality and efficiency to your project with this angle shut-off valve from Homewerks.

• 1/2 in. nominal compression x 3/8 in. O.D. compression
• Multi-turn handle
• Compatible with copper
• Chrome plated finish
• Maximum pressure rating of 125 PSI at 180 degrees Fahrenheit
• Limited lifetime warranty
• IAPMO cUPC, NSF/ANSI/CAN 61 and Lead Free certified

SharkBite Push-to-connect stop valves are the fastest way to connect to PEX, copper, CPVC, or PE-RT stubouts. These valves control the flow of water to plumbing fixtures including faucets, toilets, dishwashers, washing machines, and ice makers. Braided supply lines, PEX, or copper tubing can be used to connect the outlet of the valve to plumbing fixtures. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings and valves can be easily changed or reused Designed with stainless steel gripping teeth for a secure connection, chlorine-resistant O-ring for a long-lasting seal.

• Works on wet lines, rotatable after installation, and removable
• Push-to-connect fittings are ideal for installation in tight spaces
• Rated to 160 degrees Fahrenheit and 125 PSI
• Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
• Chrome-plated exterior body
• Low-lead DZR corrosion-resistant brass body
• Code approved, IAPMO listed, for details see Specifications
• 2-Year warranty when used with PEX, copper, CPVC & PE-RT pipe
• Meets all UPC, IPC and cUPC requirements
• Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
• 1/2 in. pipe insertion depth = 15/16 in.

1/2 in. Nom Compression Inlet x 3/8 in. O.D. Compression x 3/8 in. O.D. Compression Dual Outlet Multi-Turn Valve controls water flow to household plumbing fixtures. The dual outlet allows two independent supply lines to be attached to a single valve. Ideal for adding dishwashers, ice makers, water filters and instant hot water dispensers to existing water supply. With a few turns of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.

• Machined one-piece brass body provides strength, durability and long-lasting performance
• For use in potable water distribution systems; not intended for recirculating water systems that produce continuous use temperatures above 115 degree F; for those applications, use our KT series ball stops
• Multi-turn operation means water flow control with only a few turns of the handle
• Oval-knurled handle provides a secure grip for on/off operation
• Easy-to-remove handle protects against accidental operation during rough-ins
• 1-piece shut-off mechanism provides smooth on-off operation
• IAPMO ASME A112.18.1/CSA B125.1
• Designed, machined and assembled in the USA

1/4 in. Turn Chrome Plated Lead Free Supply Stop. Available in straight and angle configurations with a combination of IPS, sweat and compression connections. 1-piece machined brass construction which is suitable for use in both hot and cold water applications. Available in chrome, polished brass and rough brass finishes.

• Forged brass body for durability
• Chrome plated finish offers decorative appearance
• Ball valve design provides reliable shutoff and re-opening
• IAPMO and CSA Listed
• Certified to ANSI / NSF standard 61-9 Annex G
• Manufactured in an ISO accredited facility

BrassCraft 1/2 in. FIP Inlet x 3/8 in. O.D. Compression Outlet Multi-Turn Angle Valve controls water flow to household plumbing fixtures faucets, toilets, dishwashers, icemakers, washing machines, etc. The angle valve is most often used where the water pipe enters the room from the wall. With a few turns of the valve handle, you are able to stop or start the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.

• Compatible with iron pipe
• Machined, 1-piece body construction for strength, durability and long-lasting performance
• Easy-to-remove handle protects against accidental operation during rough-ins
• Multi-turn operation means water flow control with only a few turns of the handle
• Oval-knurled handle provides a secure grip for on/off operation
• Temperature rating: 40 degree to 140 degree F
• Pressure rating: 125 psi maximum
• No-lead certified
• IAPMO and CSA listed to ASME A112.18.1 / CSA B125.1

Sharkbite 1/2" Pushtoconnect Coupling. Mfg #UR008

• Doesn't Require Special Tools, Crimping, Glue Or Soldering.

The PVC Sch. 40 Ball Valves are used for cold water pressure distribution systems in residential, commercial, agricultural and light industrial applications. This NSF-approved valve features EPDM seats and O-rings and is constructed from durable PVC material. Ideal for applications where space and weight are critical considerations.

• PVC Sch. 40 construction
• Compatible with PVC piping (not included)
• FPT x FPT connections
• Add a shut off valve to your sprinkler system, irrigation system or pool
• Maximum pressure of 150 psi at 73 degree F
• Manually operated

The Tectite by Apollo 1/2 in. Push-To-Connect x 3/8 in. O.D. Compression Quarter-Turn Angle Stop Valve is designed to control water flow to plumbing fixtures such as toilets and faucets. The Angle Stop Valve is used where the water pipe enters the room to allow for easy shut-off of water flow to the end fixture allowing for maintenance and repair without having to turn water off to the entire home. The 3/8 in. O.D. male compression outlet allows for the integration of supply lines for connection to the end fixture. Tectite by Apollo push-to-connect stop valves are the cleanest and simplest way to gain flow control on copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Stop valve removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo stop valves are approved for use in both potable water and hydronic heating piping systems.

• Constructed of lead free dezincification resistant (DZR) chrome-plated brass for superior reliability
• Push-to-connect joints require no heat, solder, solvents or tools
• Push-to-connect design allows for a simple and fast installation on any combination of copper or CPVC pipe
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Listed by IAPMO and listed to ASSE 1061/NSF 82
• Meets UPC, IPC, and cUPC standard requirements
• Demount clip allows for fitting removal (included)
• Approved for behind-the-wall with no access and burial
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F

The 3/4 in. Tectite by Apollo Push-To-Connect ball valve is the fastest, cleanest and simplest way to install or replace a ball valve on copper, CPVC, PE-RT and PEX piping systems without the use of tools, solder, open flame or glue. The quarter turn, single lever control allows for simple control of water flow in hydronic and potable water systems. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, valves may be rotated for simpler installation in tight spaces.

• Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength
• Push-to-connect joints require no heat, solder, solvents or tools
• Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Quarter turn lever handle for simple flow control
• Meets UPC, IPC and cUPC standard requirements and listed by IAPMO and listed to ASSE 1061/NSF 60
• Demount clip allows for valve removal (sold separately)
• Approved for behind-the-wall with no access and burial
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F

BrassCraft 1/2 in. Nom CPVC x 3/8 in. O.D. Compression Outlet Multi-Turn Angle Valve controls water flow to household plumbing fixtures faucets, toilets, dishwashers, icemakers, washing machines, etc. The angle valve is most often used where the water pipe enters the room from the wall. With a few turns of the valve handle, you are able to stop or start the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.

• Machined, one-piece body construction for strength, durability and long-lasting performance
• Compatible with CPVC tubing
• For use in potable water distribution systems. Not intended for recirculating water systems that produce continuous use temperatures above 115 degree F. For those applications, use our KT series ball stops
• Multi-turn operation means water flow control with only a few turns of the handle
• Oval-knurled handle provides a secure grip for on/off operation
• Easy-to-remove handle protects against accidental operation during rough-ins
• Temperature rating: 40 degree to 160 degree F
• Pressure rating: 125 psi maximum
• No-lead certified
• IAPMO and CSA Listed to ASME A112.18.1 / CSA B125.1

Sharkbite Max Ball Valve 3/4" Model UR22185. Mfg #UR22185

• Can Be Installed On Wet Lines And Pressure Tested Immediately
• Stainless steel retainer adds strength and durability
• Can Be Installed On Wet Lines
• Sharkbite Max Ball Valve 3/4"

With a few turns of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without turning off water to the entire home. 100% leak tested to ensure reliable, leak-free performance. 1/2 in. Nom Comp Inlet x 3/8 in. O.D. Comp Outlet 1/4-Turn Angle Ball Stop.

• Machined one-piece brass body provides strength, durability and long-lasting performance
• For use in potable water distribution systems and recirculating water systems that produce continuous use temperatures above 115 degree F
• Precision-machined brass ball to provide smoother operation without freeze ups even after long periods of non-use
• Blow-out proof, plated stem is assembled from the inside with double O-rings to help ensure safe, reliable performance
• Easy-to-remove handle protects against accidental operation during rough-ins
• 100% leak tested to ensure reliable, leak-free performance
• Temperature rating: 40 to 180 degree F
• Pressure rating: 125 psi maximum
• IAPMO ASME A112.18.1/CSA B125.1

The Apollo ExpansionPEX 1/2 in. Chrome-Plated Brass PEX-A Barb x 3/8 in. Compression Quarter-Turn Angle Stop Valve is simple to install and provides flow control through a quarter-turn ball valve. Most commonly used at point of use fixtures, it allows for repair and maintenance of fixtures without the need to shut down flow control to the entire system. The 3/8 in. compression outlet provides the capability to install 3/8 in. O.D. tubing or 3/8 in. supply lines. It is designed for use on point of use fixtures such as dishwashers, toilets and faucets. Apollo ExpansionPEX barb fittings are a key component to one of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, Apollo ExpansionPEX couplings must be secured into place Apollo ExpansionPEX sleeves or comparable expansion-type sleeve or ring (all sold separately). The Apollo ExpansionPEX system is a comprehensive piping system comprised of lead free brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.

• Individually bagged
• Larger internal diameter of Apollo ExpansionPEX fittings results in a 25% greater flow rate within the system
• Constructed of chrome-plated lead free dezincification resistant (DZR) brass for superior reliability and strength
• Cold-expansion tool (sold separately) is required for installation
• Meets or exceeds ASTM F1960 standard
• Meets UPC, IPC and cUPC standard
• Barb x compression connection for PEX plumbing systems
• NSF listed
• Rated to 200 degree F and 200 psi
• Item is not compatible with PEXb pipe, crimp-style (ASTM 1807) or pinch clamp (ASTM F2098) piping systems

1/4 in. Turn Chrome Plated Lead Free Supply Stop. Available in straight and angle configurations with a combination of IPS, sweat and compression connections. 1-piece machined brass construction which is suitable for use in both hot and cold water applications. Available in chrome, polished brass and rough brass finishes.

• Forged brass body for durability
• Chrome plated finish offers decorative appearance
• Ball valve design provides reliable shut-off and re-opening
• IAPMO and CSA listed
• Certified to ANSI/NSF standard 61-9 annex G
• Manufactured in an ISO accredited facility

BrassCraft 1/2 in. Nom Compression Inlet x 3/8 in. OD Compression Outlet Multi-Turn Angle Valve controls water flow to household plumbing fixtures faucets, toilets, dishwashers, icemakers, washing machines, etc. The angle valve is most often used where the water pipe enters the room from the wall. With a few turns of the valve handle, you are able to stop or start the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.

• Machined, 1-piece body construction for strength, durability and long-lasting performance
• 1/2 in. nom comp inlet x 3/8 in. O.D. comp outlet multi-turn angle stop
• Compatible with copper
• For use in potable water distribution systems; not intended for recirculating water systems that produce continuous use temperatures above 115 degree F; for those applications, use our KT series ball stops
• Multi-turn operation means water flow control with only a few turns of the handle
• Oval-knurled handle provides a secure grip for on/off operation
• Easy-to-remove handle protects against accidental operation during rough-ins
• Temperature rating: 40 degree to 160 degree F
• No-lead certified
• IAPMO and CSA listed to ASME A112.18.1 / CSA B125.1

1/4 in. Turn Chrome Plated Lead Free Supply Stop. Available in straight and angle configurations with a combination of IPS, sweat and compression connections. 1-piece machined brass construction which is suitable for use in both hot and cold water applications. Available in chrome, polished brass and rough brass finishes.

• Forged brass body for durability
• Chrome plated finish offers decorative appearance
• Ball valve design provides reliable shut-off and re-opening
• IAPMO and CSA listed
• Certified to ANSI/NSF standard 61-9 annex G
• Manufactured in an ISO accredited facility

1/4 in. Turn Chrome Plated Lead Free Supply Stop. Available in straight and angle configurations with a combination of IPS, sweat and compression connections. 1-piece machined brass construction which is suitable for use in both hot and cold water applications. Available in chrome, polished brass and rough brass finishes.

• Forged brass body for durability
• Chrome plated finish offers decorative appearance
• Ball valve design provides reliable shut-off and re-opening
• IAPMO and CSA listed
• Certified to ANSI/NSF standard 61-9 annex G
• Manufactured in an ISO accredited facility

1/2 in. Nominal Compression Inlet x 3/8 in. O.D. Compression Outlet Multi-Turn Angle Stop with Brass Stem. Machined, 1-piece body construction for strength, durability and long-lasting performance. Easy-to-remove handle protects against accidental operation during rough-ins.

• Compatible with copper or PEX (PEX installations require a stainless steel tube insert)
• For use in potable water distribution systems; not intended for recirculating water systems that produce continuous use temperatures above 115 degree F; for those applications, use our KT series ball stops
• Multi-turn operation means water flow control with only a few turns of the handle
• Oval-knurled handle provides a secure grip for on/off operation
• For indoor use
• Easy-to-remove handle protects against accidental operation during rough-ins
• 1-piece shut-off mechanism provides smooth on-off operation
• No-lead certified
• IAPMO and CSA listed to ASME A112.18.1/CSA B125.1
• Designed, machined and assembled in the USA

Forged brass construction Chrome plated brass ball Double O-Rings stem seal Teflon seats Tamper proof Blue lever handle Certified 1/2 psi at the appliance Certified 5 psi for indoor piping systems For use with natural, manufactured, mixed gases and LP gas-air mixtures Made in Italy. This ball valve was made in Italy. It is constructed from forged brass. Its connections are FIP x Flare.

• Forged brass construction
• Chrome plated brass ball
• Double O-ring stem seal
• Teflon seats
• Tamper proof
• Blue lever handle
• Certified 1/2 psi at the appliance
• Certified 5 psi for indoor piping systems
• For use with natural, manufactured, mixed gases and LP gas-air mixtures
• Made in Italy

1/4 in. Turn Chrome Plated Lead Free Supply Stop. Available in straight and angle configurations with a combination of IPS, sweat and compression connections. 1-piece machined brass construction which is suitable for use in both hot and cold water applications. Available in chrome, polished brass and rough brass finishes.

• Forged brass body for durability
• Chrome plated finish offers decorative appearance
• Ball valve design provides reliable shutoff and re-opening
• IAPMO and CSA Listed
• Certified to ANSI / NSF standard 61-9 annex G
• Manufactured in an ISO accredited facility

The NIBCO lead-free, brass ball valve with solder end connections provides bubble-tight shutoff. The valve's PTFE seats and lead-free ball exhibit high corrosion resistance properties. The valve is ideal for hot/cold water applications.

• 11/2 in. Inside Diameter and 1.625 in. Outside Diameter
• Full port
• Blowout-proof stem
• Female solder cup end connections
• CSA certified to ASME B16.44
• Valve pressure rating 600 psi/41.4 bar non-shock cold working pressure
• Standard lever handle
• "11/2 I.D. and 1.625 O.D."

The 3/4 in. Tectite by Apollo Push-To-Connect Slip Ball Valve is an innovation designed to make a quick repairs or add flow control through a ball valve to rigid Copper or CPVC Pipe. The slip capability allows a section (up to 2 in.) of pipe to be cut out allowing for the easy installation of the ball valve where rigid pipes do not allow movement. Simply insert the slip coupling on to the pipe and using the Tectite by Apollo demount clip (included) to slip the fitting back onto the other end of pipe completing the connection. Great for emergencies and freeze repairs, the Tectite by Apollo Push-To-Connect slip ball valve is the fastest, cleanest and simplest way to add flow control to copper or CPVC pipe without the use of tools, solder, open flame or glue. Fitting removal and reuse is just as simple using a simple demount clip (included). After assembly, valves may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.

• Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength
• Push-to-connect joints require no heat, solder, solvents or tools
• Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Quarter turn lever handle for simple flow control
• Meets UPC, IPC and cUPC standard requirements and listed by IAPMO and listed to ASSE 1061/NSF 58
• Demount clip allows for valve removal (included)
• Approved for behind-the-wall with no access and burial
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F

1/4 in. Turn Chrome Plated Lead Free Supply Stop. Available in straight and angle configurations with a combination of IPS, sweat and compression connections. 1-piece machined brass construction which is suitable for use in both hot and cold water applications. Available in chrome, polished brass and rough brass finishes.

• Forged brass body for durability
• Chrome plated finish offers decorative appearance
• Ball valve design provides reliable shutoff and re-opening
• IAPMO and CSA listed
• Certified to ANSI / NSF standard 61-9 annex G
• Manufactured in an ISO accredited facility