EQ type load centers with main lugs feature a combination trim box in one package. Spa Panels are ideal for outdoor applications requiring the use of ground fault protection, such as hot tubs. A factory installed 2-Pole GFCI breaker is provided, along with 2 extra circuits.

• Factory installed Siemens 2-pole 50 Amp GFCI circuit breaker (QF250P)
• 2 extra spaces for branch circuits
• Interiors offer removal in seconds
• Single phase
• 1 piece bus bar construction designed for use only with circuit breakers
• UL listed on 60/75C conductors
• Positive load side circuit breaker hook rails
• Factory installed 5 position ground bar
• Uses HS type hubs
• NEMA type 3R: enclosure is intended for outdoor use primarily to provide a degree of protection against falling rain and sleet and must remain undamaged by the formation or ice on the enclosure; they are not intended to provide protection against conditions such as dust, internal condensation, or internal icing

The Square D Electric Homeline Value Pack 200 Amp 30-Space 60-Circuit Indoor Convertible Main Breaker Load Center provides safety and value to contractors, remodelers or homeowners. It's built with a plated, aluminum bus bar that's compatible with Square D Homeline circuit breakers. These breaker boxes are designed for fast installation and wire savings. This breaker is fully distributed and UL listed for residential and commercial power distribution.

• Plug-On Neutral Design: Features a fully distributed neutral bar, allowing for the installation of Homeline plug-on neutral combination arc fault breakers in any space
• Wide Breaker Compatibility: Each pole space supports Square D Homeline full-size, tandem, or quad breakers, offering flexibility for your electrical setup
• Ground and Neutral Bar Capacity: Accepts up to (3) #10-14 equipment grounds for enhanced wiring versatility
• Value Pack Components: Includes (3) HOM120 Homeline 20 Amp single-pole circuit breakers, (2) HOM230 Homeline 30 Amp double-pole circuit breakers, and a combination flush/surface cover
• Supports Surge Protection: Accommodates a plug-on secondary surge arrestor (sold separately) for added electrical safety
• Overhead or Underground Feed: Install easily by rotating the device to match your feed type
• Single-Phase Indoor Main Breaker Panel: Designed for 120/240 VAC systems with a 22,000 AIR short circuit current rating
• Rated 120/240 VAC and 22,000 AIR short circuit current rating
• Automatic Flush Adjusting Cover: Reduces installation time with an easy-to-use, adjustable cover
• Straight-In Mains Design: Saves on expensive cable and reduces installation time
• Enhanced Wiring Flexibility: Distributed split branch neutral includes terminal screws backed out, offering up to 50% more terminals than UL standards require
• Rugged Thermoplastic Interior: Built with durable materials to withstand heavy use
• User-Friendly Screws: Slot/square drive screws allow for standard flat blade or square-head screwdrivers, ensuring proper torque
• Removable Interior for Security: Protects from damage or theft on the job site with a single captive screw for easy removal
• Customizable Ground Bar Locations: Three ground bar mounting locations (left, right, and end) for easy wiring access

Siemens PN Series Load Centers - a high quality and feature-rich line of load center products designed to meet applications for virtually every need. The PN Series load center provides maximum flexibility in combination with labor saving features to aid the contractor while installing the product. PN Series load centers accept the plug-on neutral breakers, patented insta-wire neutral/ground system, convertibility, copper bussing and mounting tabs on the trim - these features were specifically engineered to decrease installation time and increase flexibility.

• Features siemens plug-on neutral, for simple quick installation, that is spacious with over 4 in. of wire bending space, and a secure reliable installation method
• PN Series plug-on neutral load center includes 2 factory installed ground bars
• Single phase load center
• Tin plated copper bus
• NEMA Type 1 enclosure
• Grey trim
• Interrupt rating: 22000 AIC
• UL Listed

Siemens PN Series Load Centers - a high quality and feature-rich line of load center products designed to meet applications for virtually every need. The PN Series load center provides maximum flexibility in combination with labor saving features to aid the contractor while installing the product. PN Series load centers accept the plug-on neutral breakers, patented insta-wire neutral/ground system, convertibility, copper bussing and mounting tabs on the trim - these features were specifically engineered to decrease installation time and increase flexibility.

• Features siemens plug-on neutral, for simple quick installation, that is spacious with over 4 in. of wire bending space, and a secure reliable installation method
• PN Series plug-on neutral load center includes 2 factory installed ground bars
• Single phase load center
• Tin plated copper bus
• NEMA Type 3R enclosure
• Grey trim
• Interrupt rating: 100000 AIC
• UL Listed

The Square D Homeline 100 Amp 6-Space 12-Circuit Outdoor fixed Main Lugs Load Center is UL listed for residential and commercial power distribution. This load center is built with a plated, aluminum bus bar that is tested and is compatible with Square D Homeline circuit breakers. Homeline load centers are designed for the value-minded contractors, remodelers, builders and homeowners. Square D Homeline breaker boxes are engineered for fast installation and wire savings.

• Durable Outdoor Design: Square D Homeline 100 Amp 6-Space 12-Circuit Outdoor Main Lug Load Center with a rainproof cover for reliable outdoor use
• Includes a rainproof outdoor cover
• Supports Secondary Surge Protection: Compatible with plug-on secondary surge arrestors (sold separately) for enhanced electrical safety
• Flexible Wiring Options: Main feeders terminate from the top, with feeder entry possible from any direction (device is not rotatable)
• Easy Wire Installation: Features knockouts on all sides of the breaker box for quick and hassle-free wire routing
• Single-Phase, Outdoor Rated: Designed for outdoor installation with a 120/240 VAC rating and 10,000 AIR short circuit current rating
• Rated 120/240 VAC and 10,000 AIR short circuit current rating
• Secure and Theft-Resistant: Includes a rainproof cover with a stainless steel hasp that can be padlocked for added safety
• Rugged Construction: Thermoplastic interior assembly offers industry-leading durability for long-term use
• Convenient Screw Design: Slot/square drive screws allow use of either a flat blade or square-head screwdriver for secure and precise installation
• Customizable Grounding Options: Includes 3 ground bar mounting locations (left, right, and end) for ease of wiring

The Square D by Schneider Electric Homeline Value Pack 200 Amp 40-Space 80-Circuit Indoor Convertible Main Breaker Qwik-Grip Load Center for Plug-on Neutral breakers includes a cover and a selection of breakers. It is UL listed for residential and commercial power distribution. This load center is built with a plated, aluminum bus bar that is tested and is compatible with Square D Homeline circuit breakers. Homeline load centers are designed for the value-minded contractors, remodelers, builders and homeowners. Square D Homeline breaker boxes are engineered for fast installation and wire savings.

• Square D Homeline 200 Amp 40-Space 80-Circuit Indoor Main Breaker Qwik-Grip Plug-On Neutral Load Center with Cover - Value Pack
• Innovative Qwik-Grip Design: Features a cable entry system that securely grips branch wires, eliminating the need for steel knockouts and cable connectors, ensuring faster and cleaner installations
• Plug-On Neutral Bar: Fully distributed neutral bar supports Homeline plug-on neutral combination arc fault breakers on any space, simplifying circuit customization
• Versatile Breaker Compatibility: Each pole space accepts full-size, tandem, or quad breakers for enhanced flexibility
• Ground and neutral bars accept up to (3) #10-14 equipment grounds flush/surface indoor cover
• Included Circuit Breakers: Includes (3) HOM120 20 Amp single-pole circuit breakers and (2) HOM230 30 Amp double-pole circuit breakers for added value and convenience
• Surge Protection Ready: Compatible with plug-on secondary surge arrestors (sold separately) to protect your electrical system
• Overhead or Underground Feed: Easily adaptable feed direction by rotating the device before installation
• Indoor Installation: Single-phase design rated at 120/240 VAC with a robust 22,000 AIR short circuit current rating
• Rated 120/240-Volt AC and 22,000 air short circuit current rating
• Automatic Flush Cover: Streamlined flush adjusting cover reduces installation time and effort
• Straight-In Mains Design: Saves on expensive cabling costs and reduces installation time
• Enhanced Wiring Flexibility: Distributed split branch neutral with pre-loosened terminal screws and up to 50% more terminals than UL requirements
• Durable and Reliable: Thermoplastic interior assembly ensures industry-leading ruggedness for long-lasting performance
• Easy Screw Installation: Slot/square drive screws accommodate both flat blade and square-head screwdrivers for proper torque and positive drive
• Theft-Resistant Interiors: Interiors can be quickly removed with a single captive screw for added protection during job site storage
• Customizable Grounding Options: Features 3 ground bar mounting locations (left, right, and end) for optimal wiring convenience

The Square D Homeline 200 Amp 30-Space 42-Circuit Outdoor Surface Mount Solar-Ready Combination Meter Socket and Main Breaker Load Center for Plug-on Neutral breakers is UL listed for residential and commercial power distribution. This combination service entrance device (CSED) is built with a plated, aluminum bus bar that is tested and is compatible with Square D Homeline circuit breakers. Homeline CSEDs are designed for the value-minded contractors, remodelers, builders and homeowners. Homeline CSEDs are engineered for fast installation and wire savings.

• Square D Homeline 200 Amp 30-Space 42-Circuit Outdoor Ring-Type Surface Mount Solar-Ready Main Breaker Plug-On Neutral CSED
• Includes a fully distributed neutral bar, allowing for the installation of Homeline plug-on neutral combination arc fault and dual function breakers on any space
• Solar-ready for new or future installations with provisions for field-installed CTs on line bus
• Accepts solar ready sub-feed lug kit SR69064A for solar connections ahead of the main breaker
• Meets EUSERC specifications
• Factory-installed 200 Amp main breaker
• Rated 120/240 VAC and 22,000 AIR short circuit current rating
• Ground and neutral bars accept up to (3) #10-14 equipment grounds
• 4 jaw ring type meter socket
• Surface mount NEMA type 3R enclosure for outdoor installation
• Accommodates plug-on secondary surge arrestor, and features a plug-in design for easy installation
• Thermoplastic interior assembly is among the most rugged in the industry
• Slot/square drive screws let you use either standard flat blade screwdriver or square-head driver for positive drive and proper torque
• Bypass type-none
• UL Listed and ANSI certified

The Square D Homeline Value Pack 200 Amp 30-Space 60-Circuit Outdoor Convertible Main Breaker Load Center for Plug-on Neutral breakers includes a selection of breakers and is UL listed for residential and commercial power distribution. This load center is built with a plated, aluminum bus bar that is tested and is compatible with Square D Homeline circuit breakers. Homeline load centers are designed for the value-minded contractors, remodelers, builders and homeowners. Square D Homeline breaker boxes are engineered for fast installation and wire savings.

• Square D Homeline 200 Amp 30-Space 60-Circuit Outdoor Main Breaker Plug-On Neutral Load Center - Value Pack
• Includes a fully distributed neutral bar, allowing for the installation of Homeline plug-on neutral combination arc fault breakers on any space
• Each pole space accepts full-size, tandem or quad breakers
• Ground and neutral bars accept up to (3) #10-14 equipment grounds
• Includes(3) HOM120 Homeline 20 Amp single-pole circuit breakers, (2) HOM230 Homeline 30 Amp double-pole circuit breakers and a rainproof outdoor cover
• Accommodates plug-on secondary surge arrestor (sold separately)
• Main feeders terminate from the top, feeders can enter from any direction, however, device cannot be rotated
• Single phase, for outdoor installation
• Rated 120/240 VAC and 22,000 AIR short circuit current rating
• Rainproof cover features a stainless steel hasp that is easily padlocked for safety from theft
• Designed with straight-in mains to save expensive cable and time
• Distributed split branch neutral with terminal screws backed out offering with up to 50% more terminals than UL requires increases wiring flexibility saving installation time and simplifies wiring
• Thermoplastic interior assembly is among the most rugged in the industry
• Slot/square drive screws let you use either standard flat blade screwdriver or square-head driver for positive drive and proper torque
• For protection from damage or theft on the job site, interiors can be easily removed with a single captive screw
• 3 ground bar mounting locations (left, right and end) let you pick the easiest spot to wire

Specially designed for easy installation, Eaton's BR 1-inch loadcenters house the branch circuit breakers and the wiring required to distribute power to individual circuits. They serve as main breaker for service entrances or as main lug when adding circuits to existing service. The main breaker protects the entire panel and can be used as a service disconnect. The branch breakers protect the wires leading to individual electrical loads such as fixtures and outlets.

• Amperage rating: 200 Amp
• Cover: cover included
• Enclosure: NEMA 3R
• Interrupt rating: 22 kAIC
• Bus material: aluminum
• Used with: type BR 1 in. breakers
• BR type plug-on neutral breaker box eliminates the pigtail connection providing time and labor savings
• Dedicated neutral bus for breaker connection
• In-board neutral bar increases gutter space to allow for professional installation of conductors
• Backed out neutral screws allows for quick connection of neutral and ground conductors
• Optimized knockout locations for additional access and easier to remove
• Self-leveling tabs allow for quick drywall offset and helps simplify installation
• Keyhole hanging feature allows for ease of cover installation for both top and bottom feed applications
• Rigid cover spine provides strength when twist outs are removed allowing for easier removal
• Eaton offers a full line of circuit breakers to meet all your protection needs including arc fault, ground fault, dual function and surge protection

The Square D Homeline 100 Amp 20-Space 40-Circuit Outdoor Convertible Main Breaker Load Center for Plug-on Neutral breakers is UL listed for residential and commercial power distribution. This load center is built with a plated, aluminum bus bar that is tested and listed only for Homeline circuit breakers. Homeline load centers are designed for the value-minded contractors, remodelers, builders and homeowners. Homeline load centers are engineered for fast installation and wire savings.

• Includes a fully distributed neutral bar, allowing for the installation of Homeline plug-on neutral combination arc fault breakers on any space
• Each pole space accepts full-size, tandem or quad breakers
• Ground and neutral bars accept up to (3) #10-14 equipment grounds
• Includes a rainproof outdoor cover
• Accommodates plug-on secondary surge arrestor (sold separately)
• Main feeders terminate from the top, feeders can enter from any direction, however, device cannot be rotated
• Single phase
• Rated 120/240 VAC and 22,000 AIR short circuit current rating
• Rainproof cover features a stainless steel hasp that is easily padlocked for safety from theft
• Designed with straight-in mains to save expensive cable and time
• Distributed split branch neutral with terminal screws backed out offering with up to 50% more terminals than UL requires increases wiring flexibility saving installation time and simplifies wiring
• Thermoplastic interior assembly is among the most rugged in the industry
• Slot/square drive screws let you use either standard flat blade screwdriver or square-head driver for positive drive and proper torque
• For protection from damage or theft on the job site, interiors can be easily removed with a single captive screw
• 3 ground bar mounting locations (left, right and end) let you pick the easiest spot to wire

The Siemens EQ 125 Amp 8-Space 16-Circuit Main Lug Outdoor Load Center is NEMA 3R rated for outdoor use and has a hinged door that can be removed by backing-out 1 screw. The load center features a 1-piece copper buss bar that offers excellent conductivity and is ideal for use where the environment can become severe, such as on farms and near coastal areas. Suitable for use as service equipment when a main breaker (125 Amp maximum) is back-fed in a branch position and used with main breaker retainer clip No.

• For use as a main lug load center
• Suitable for use as service entrance equipment when a main breaker is installed
• NEMA 3R rated for outdoor use
• G90 hot-dipped, galvanized-carbon-steel enclosure helps provide corrosion protection and has a hinged door that can be removed by backing out 1 screw
• Powder coating of polyester paint using electrostatic process enhances corrosion protection and gives a great-looking finish, free of drips and runs
• 1-piece copper buss bar is designed for use only with circuit breakers (not included) and offers excellent conductivity
• Single phase
• 3-wire
• 120/240 VAC
• 100,000 AIR
• Insta-wire for quick conductor installation
• Ideal for use where the environment can become severe, such as on farms and near coastal areas
• ANSI certified and UL listed
• Convertible from a main lug load center to a main breaker load center
• Interior offers removal in seconds
• Combination trim box in 1-package
• Positive load-side circuit-breaker hook rails
• Uses type HS hubs (not included)

Quick, easy and clean describe the new plug-on neutral design attributes offered by Eaton. Time saving features offer a quick installation equating to less time on the job. Designed to maximize installation efficiency and to provide additional convenience allowing for an easy installation. New features that help ensure an aesthetically clean and professional installation.

• Amperage rating: 125 Amp
• Cover: cover included
• Enclosure: NEMA 1
• Bus material: aluminum
• Used with type BR 1 in. breakers
• BR type plug-on neutral breaker box eliminates the pigtail connection providing time and labor savings
• Dedicated neutral bus for breaker connection
• In-board neutral bar increases gutter space to allow for professional installation of conductors
• Backed out neutral screws allows for quick connection of neutral and ground conductors
• Optimized knockout locations for additional access and easier to remove
• Self-leveling tabs allow for quick drywall offset and helps simplify installation
• Keyhole hanging feature allows for ease of cover installation for both top and bottom feed applications
• Rigid cover spine provides strength when twist outs are removed allowing for easier removal
• Eaton offers a full line of circuit breakers to meet all your protection needs including arc fault, ground fault, dual function and surge protection

The Square D 125 Amp 16-Space 24-Circuit Outdoor Combination meter Socket and Main Breaker Load Center is suitable for use as a combination service entrance device (CSED). This unit is ANSI certified and UL listed with a maximum 10,000 AIR. The combination service entrance device features a Ring-type meter cover with a single-phase, 4-jaw meter socket. It is suitable for overhead or underground service applications. Meets EUSERC Specifications. Surface mount. This CSED is built with a plated, aluminum bus bar that is tested and listed only for Homeline circuit breakers. Homeline CSEDs are designed for the value-minded contractors, remodelers, builders and homeowners. Homeline CSEDs are engineered for fast installation and wire savings.

• Homeline 125 Amp 16-space 24-circuit ring-type surface mount main breaker CSED
• Suitable for use as service entrance equipment
• Accommodates plug-on secondary surge arrestor and features a plug-in design for easy installation
• Ring-type design with no bypass
• For use with Homeline breakers only
• NEMA type 3R enclosure for outdoor use
• 4-jaw meter socket included in design
• Designed with straight-in mains to save expensive cable and time
• Thermoplastic interior assembly is among the most rugged in the industry
• Slot/square drive screws let you use either standard flat blade screwdriver or square-head driver for positive drive and proper torque
• UL Listed and ANSI certified

Siemens SN Series Load Center is the smart choice when value and quick installation are of highest priority. The SN Series load centers include labor saving features such as the ability to accept Plug-on neutral breakers, patented Insta-wire and mounting trim tabs. These exclusive features make the SN Series load center the best load center for the value minded contractor.

• Features Siemens plug-on neutral, for simple quick installation, that is spacious with over 4 in. of wire bending space, and a secure reliable installation method
• SN series plug-on neutral load center includes 1 factory installed ground bars
• Single phase load center
• Aluminum bus
• NEMA type 3R enclosure
• Grey trim
• Interrupt rating: 100000 AIC
• UL Listed

Quick, easy and clean describe the new plug-on neutral design attributes offered by Eaton. Time saving features offer a quick installation equating to less time on the job. Designed to maximize installation efficiency and to provide additional convenience allowing for an easy installation. New features that help ensure an aesthetically clean and professional installation.

• Amperage rating: 200 Amp
• Cover: cover included
• Enclosure: NEMA 3R
• Interrupt rating: 25 kAIC
• Bus material: aluminum
• Used with: type BR 1 in. breakers
• Feed through lugs
• BR type plug-on neutral breaker box eliminates the pigtail connection providing time and labor savings
• Dedicated neutral bus for breaker connection
• In-board neutral bar increases gutter space to allow for professional installation of conductors
• Backed out neutral screws allows for quick connection of neutral and ground conductors
• Optimized knockout locations for additional access and easier to remove
• Self-leveling tabs allow for quick drywall offset and helps simplify installation
• Keyhole hanging feature allows for ease of cover installation for both top and bottom feed applications
• Rigid cover spine provides strength when twist outs are removed allowing for easier removal
• Eaton offers a full line of circuit breakers to meet all your protection needs including arc fault, ground fault, dual function and surge protection

The Square D Homeline Value Pack is a 125 Amp 12-Space 24-Circuit Outdoor Convertible Main Breaker Load Center with cover for Plug-on Neutral breakers includes a selection of breakers and is UL listed for residential and commercial power distribution. This load center includes (3) HOM120 Homeline 20 Amp single-pole circuit breakers, (2) HOM230 Homeline 30 Amp double-pole circuit breakers and a rainproof outdoor cover, built with a plated, aluminum bus bar that is tested and listed only for Homeline circuit breakers. Homeline load centers are designed for the value-minded contractors, remodelers, builders and homeowners. Homeline load centers are engineered for fast installation and wire savings.

• Each pole space accepts full-size, tandem or quad breakers
• Ground and neutral bars accept up to (3) #10-14 equipment grounds
• Includes (3) HOM120 Homeline 20 Amp single-pole circuit breakers, (2) HOM230 Homeline 30 Amp double-pole circuit breakers and a rainproof outdoor cover
• Accommodates plug-on secondary surge arrestor (sold separately)
• Main feeders terminate from the top, feeders can enter from any direction, however, device cannot be rotated
• Single phase
• Rated 120/240 VAC and 22,000 AIR short circuit current rating
• Rainproof cover features a stainless steel hasp that is easily padlocked for safety from theft
• Designed with straight-in mains to save expensive cable and time
• Distributed split branch neutral with terminal screws backed out offering with up to 50% more terminals than UL requires increases wiring flexibility saving installation time and simplifies wiring
• Thermoplastic interior assembly is among the most rugged in the industry
• Slot/square drive screws let you use either standard flat blade screwdriver or square-head driver for positive drive and proper torque
• For protection from damage or theft on the job site, interiors can be easily removed with a single captive screw
• 3-ground bar mounting locations (left, right and end) let you pick the easiest spot to wire

Specially designed for easy installation, Eaton's CH load centers house the branch circuit breakers and the wiring required to distribute power to individual circuits. This panel is a main lug panel which is used as sub-panel to add circuits to an existing main breaker panel. Sub panels are often used in a garage, home addition, barn or storage shed and/or workshop. The branch breakers protect the wires leading to individual electrical loads such as fixtures and outlets. The CH8L125SP is a 125 Amp main lug with 8 spaces and 8 circuits.

• Amperage rating: 125
• Bus material: copper
• Rated NEMA 1 for indoor use
• Feed type: overhead or underground
• Number of circuits: 16
• Number of spaces: 8
• Phase: single-phase
• Voltage rating: 120/240
• Wire size: #6-1/0
• Tangential center knockout easier installation for conduit applications
• Steel back pan provides solid and reliable breaker mounting single piece design for stability and durability
• Single keyhole mounting - 1 keyhole at the top provides easier mounting and leveling
• Drywall marking on enclosure - indicates proper mounting depth for flush applications
• Used with: type CH breakers

The Square D by Schneider Electric Homeline Value Pack 100 Amp 20-Space 40-Circuit Indoor Convertible Main Breaker Qwik-Grip Load Center for Plug-on Neutral breakers includes the cover, a selection of breakers and is UL listed for residential and commercial power distribution. This load center is built with a plated, aluminum bus bar that is tested and is compatible with Square D Homeline circuit breakers. Homeline load centers are designed for the value-minded contractors, remodelers, builders and homeowners. Square D Homeline breaker boxes are engineered for fast installation and wire savings.

• Square D Homeline 100 Amp 20-Space 40-Circuit Indoor Main Breaker Qwik-Grip Plug-On Neutral Load Center with Cover - Value Pack
• Innovative Qwik-Grip System: Features a revolutionary cable entry system that grips branch wires securely while eliminating steel knockouts and cable connectors for faster and easier installation
• Fully Distributed Neutral Bar: Designed for seamless installation of Homeline plug-on neutral combination arc fault circuit breakers on any space
• Flexible Breaker Compatibility: Each pole space supports full-size, tandem, or quad Homeline breakers, offering versatile circuit management
• Ground and neutral bars accept up to (3) #10-14 equipment grounds
• Comprehensive Value Pack: Includes (2) HOM120 20 Amp single-pole circuit breakers, (1) HOM230 30 Amp double-pole circuit breaker, and a combination flush/surface cover for added convenience
• Surge Protection Ready: Compatible with plug-on secondary surge arrestors (sold separately) for enhanced electrical safety
• Overhead/Underground Feed Options: Easily switch between overhead or underground feed by rotating the device during installation
• Single-Phase Breaker Box: Built for single-phase indoor applications
• High Electrical Rating: Rated 120/240 VAC with a 22,000 AIR short circuit current rating for reliable performance
• Time-Saving Features: Includes an automatic flush-adjusting cover and straight-in mains design to reduce installation time and save on cable costs
• Designed with straight-in mains to save expensive cable and time
• Enhanced Wiring Flexibility: Distributed split branch neutral offers up to 50% more terminals than UL requirements, simplifying wiring and increasing flexibility
• Durable and Rugged Design: Constructed with a thermoplastic interior assembly for long-lasting durability
• Convenient Fasteners: Slot/square drive screws allow the use of either a flat-blade or square-head screwdriver for secure fastening and proper torque
• Secure and Theft-Resistant: Interior components can be easily removed with a single captive screw, protecting them from damage or theft on job sites
• Versatile Ground Bar Mounting: Includes three ground bar mounting locations (left, right, and end) for optimal wiring convenience

This is a Type CH combination cover for select Type CH surge ready loadcenters. Eatons Type CH 3/4 in. load centers enclose CH breakers for power distribution and circuit protection in residential and light commercial applications. This loadcenter cover is rated NEMA 1 for indoor use.

• Combination cover for type CH surge loadcenters
• Cover is rated nema 1 for indoor use
• Please refer to the compatibility chart for Type CH loadcenters this cover will fit
• Type CH products have a lifetime limited warranty

Siemens PN Series Load Centers - a high quality and feature-rich line of load center products designed to meet applications for virtually every need. The PN Series load center provides maximum flexibility in combination with labor saving features to aid the contractor while installing the product. PN Series load centers accept the plug-on neutral breakers, patented insta-wire neutral/ground system, convertibility, copper bussing and mounting tabs on the trim - these features were specifically engineered to decrease installation time and increase flexibility.

• Features siemens plug-on neutral, for simple quick installation, that is spacious with over 4 in. of wire bending space, and a secure reliable installation method
• PN Series plug-on neutral load center includes 2 factory installed ground bars
• Single phase load center
• Tin plated copper bus
• NEMA Type 1 enclosure
• Grey trim
• Interrupt rating: 22000 AIC
• UL Listed

The Square D Homeline 200 Amp 8-Space 16-Circuit Outdoor Convertible Main Breaker Load Center for Plug-on Neutral breakers has feed-thru lugs and is UL listed for residential and commercial power distribution. This load center is built with a plated, aluminum bus bar that is tested and is compatible with Square D Homeline circuit breakers. Homeline load centers are designed for the value-minded contractors, remodelers, builders and homeowners. Square D Homeline breaker boxes are engineered for fast installation and wire savings.

• Square D Homeline 200 Amp 8-Space 16-Circuit Outdoor Main Breaker Load Center with Feed-Thru Lug
• Includes a fully distributed neutral bar, allowing for the installation of Homeline plug-on neutral combination arc fault breakers on any space
• Each pole space accepts full-size, tandem or quad Square D Homeline breakers
• Ground and neutral bars accept up to (3) #10-14 equipment grounds
• Includes feed-thru lugs and a rainproof outdoor cover
• Accommodates plug-on secondary surge arrestor (sold separately)
• Main feeders terminate from the top, feeders can enter from any direction, however, device cannot be rotated
• Single phase, for outdoor installation
• Rated 120/240 VAC and 22,000 AIR short circuit current rating
• Rainproof cover features a stainless steel hasp that is easily padlocked for safety from theft
• Designed with straight-in mains to save expensive cable and time
• Distributed split branch neutral with terminal screws backed out offering with up to 50% more terminals than UL requires increases wiring flexibility saving installation time and simplifies wiring
• Thermoplastic interior assembly is among the most rugged in the industry
• Slot/square drive screws let you use either standard flat blade screwdriver or square-head driver for positive drive and proper torque
• For protection from damage or theft on the job site, interiors can be easily removed with a single captive screw
• 3-ground bar mounting locations (left, right and end) let you pick the easiest spot to wire

Specially designed for easy installation, Eaton's CH load centers house the branch circuit breakers and the wiring required to distribute power to individual circuits. This panel is a main lug panel which is used as sub-panel to add circuits to an existing main breaker panel. Sub panels are often used in a garage, home addition, barn or storage shed and/or workshop. The branch breakers protect the wires leading to individual electrical loads such as fixtures and outlets. The CH8L125RP is a 125 Amp outdoor main lug with 8 spaces and 8 circuits.

• Amperage rating: 125
• Bus material: copper
• Rated NEMA 3R for outdoor use
• Feed type: overhead
• Number of circuits: 16
• Number of spaces: 8
• Phase: single-phase
• Voltage rating: 120/240
• Wire size: #6-1/0
• Tangential center knockout easier installation for conduit applications
• Steel back pan provides solid and reliable breaker mounting single piece design for stability and durability
• Single keyhole mounting - 1 keyhole at the top provides easier mounting and leveling
• Drywall marking on enclosure - indicates proper mounting depth for flush applications
• Used with: type CH breakers

Siemens SN Series Load Center is the smart choice when value and quick installation are of highest priority. The SN Series load centers include labor saving features such as the ability to accept Plug-on neutral breakers, patented Insta-wire and mounting trim tabs. These exclusive features make the SN Series load center the best load center for the value minded contractor. It includes three Q120 1-Pole 20A and one Q230 2-Pole 30A breakers. It is spacious with over 4 inches of wire bending space. The sturdy hook-rail and reliable connection improves its security.

• Features siemens plug-on neutral, for simple quick installation, that is spacious with over 4 in. of wire bending space, and a secure reliable installation method
• SN Series plug-on neutral load center includes 1 factory installed ground bars
• Single phase load center
• Aluminum bus
• NEMA Type 1 enclosure
• Grey trim/ value pack
• Interrupt rating: 22000 AIC
• UL Listed

Siemens PN Series Load Centers - a high quality and feature-rich line of load center products designed to meet applications for virtually every need. The PN Series load center provides maximum flexibility in combination with labor saving features to aid the contractor while installing the product. PN Series load centers accept the plug-on neutral breakers, patented insta-wire neutral/ground system, convertibility, copper bussing and mounting tabs on the trim - these features were specifically engineered to decrease installation time and increase flexibility.

• Features siemens plug-on neutral, for simple quick installation, that is spacious with over 4 in. of wire bending space, and a secure reliable installation method
• PN Series plug-on neutral load center includes 2 factory installed ground bars
• Single phase load center
• Tin plated copper bus
• NEMA Type 1 enclosure
• Grey trim
• Interrupt rating: 100000 AIC
• UL Listed