Searched for "40151500"
Pressure switches are used to control electrically driven water pumps, suitable for all types of pumps; jets, submersible, reciprocating, etc. Pressure switches are needed for rural water systems that rely on well to supply their water. Water is pumped from the well or other water source to the pressure tank and as the tank fills the air in the tank becomes pressurized. When the pre-set pressure is reached, the pressure switch contacts open to stop the pump. When water is used, the pressure in the pressure tank fall and as it reached the pre-set cut in pressure of the switch the contacts close, starting the cycle over. These pressure switches are easily adjusted by following instruction inside the switch cover.
- Standard duty
- NEMA type 1 indoor enclosure
- 2 pole, rated 1-1/2 HP at 115 Vac, 2HP at 230 VAC
- Pressure Connection: 1/4 in. NPSF, pressure setting 30-50
- Adjustable cut in/out: cut out range 20-65 psig
No float, no problems. ClearVues iQ Technology and Floatless Sensor make this the most advanced condensate pump ever. ClearVue runs at the minimum speed needed, saving wear on the pump. Its unique self-cleaning feature senses problems and automatically enters a self-cleaning mode using condensate water to fix the issue. The ClearVue pump features a clear bottom tank to easily check the water level.
- ClearVue float less sensor eliminates the problems associated with conventional condensate pumps such as debris fouling, sunken floats, and misalignment, no float, no problem
- ClearVue senses how fast the condensate is entering the tank and adjusts to the lowest effective speed, making it quieter than a regular pump while also keeping the tank clear
- Unique self-cleaning feature senses problems and automatically enters a self-cleaning mode using condensate water to fix the issue
- ClearVue pump features a clear bottom tank to easily check the water level
- ClearVue pump can provide up to 22 ft. of lift if needed and runs at the minimum speed needed, saving wear and tear
- ClearVue includes specially designed rubber feet that dampen vibration and noise making ClearVue quiet and easy to live with
Avoid excess condensation from your HVAC equipment with Little Giant's VCMA-20ULS condensate pump. Used to move and direct the flow of condensation produced by boilers, furnaces, air conditioning systems and hydroponic systems, the VCMA-20 condensate pump is ideal when gravity drainage is not possible or practical. Its state-of-the-art design features a vertical-type pump unit to fit in tight spaces requiring a smaller footprint.
- 1/30 hp high-performance motor
- ABS tank, motor cover and volute
- Stainless steel motor shaft
- 1/2 Gal. tank capacity
- Safety switch included
The VCMA-15UL is ideal for automatic collection and removal of condensate from air conditioning, refrigeration and de-humidification equipment when gravity drainage is not possible or practical. Also suitable for high efficiency oil and gas-fired condensing furnace and condensing boiler equipment. This units includes a 6 ft. cord as well as a .5 Gal. reservoir.
- 1/50 hp high-performance motor pumps 65 Gal. of water per hour
- ABS tank, motor cover and volute
- Stainless steel motor shaft
- 1/2 Gal. collection tank
Pressure switches are used to control electrically driven water pumps, suitable for all types of pumps: jets, submersible, reciprocating, etc. Pressure switches are needed for rural water systems that rely on wells to supply their water. Water is pumped from the well or other water source to the pressure tank and as the tank fills the air in the tank becomes pressurized. When the pre-set pressure is reached, the pressure switch contacts open to stop the pump. When water is used, the pressure on the pressure tank falls and as it reaches the pre-set cut in pressure of the switch the contacts close, starting the cycle over. These pressure switches are easily adjusted by following instruction inside the switch cover.
- Standard duty
- NEMA type 1 indoor enclosure
- 2 pole, rated 1-1/2 HP at 115 Vac, 2HP at 230 Vac
- Pressure connection: 1/4 in. NPSF, pressure setting 40-60
- Adjustable cut in/out: cut out range 20-65 psig
Featuring super quiet operation, specifically designed for ductless system installations, and including iQ Technology and Floatless Sensor, ClearVue Mini is chock full of innovative features, and priced competitively. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.
- Clear tank feature of ClearVue Mini allows the user to see the activities inside allowing for faster and accurate troubleshooting
- ClearVue mini's floatless sensor eliminates the problems associated with conventional condensate pumps - no float, no problem
- ClearVue mini is compact and fits almost anywhere including inside a line set cover, the ceiling, behind a wall or in some cases inside the wall cassette unit
- ClearVue mini determines how fast condensate is entering the tank and adjusts its speed and lift to match the conditions and keep the tank clear
- Shuts down the compressor in case of a clogged line, preventing damage to equipment or environment
- ClearVue mini is nearly inaudible, the sound rating is significantly less than 20 dB, this quiet operation allows for maximum installation flexibility
Pro Series Pumps High Water Alarm is designed to minimize the risk of water damage by acting as an early warning system. For over two decades the Pro Series Pumps High Water Alarm has been protecting from unwanted water damage. It can be placed next to a water heater, beneath a laundry tub, under a sink, behind a refrigerator, next to the air conditioner, anywhere where water or moisture can collect. All it takes is 1/32 in. of water to sound a loud 110 dB alarm, detecting water before mold can grow, or alerting you to potential flood conditions. It includes 6 ft of wire for extending the sensor too hard to reach locations. You can even increase the wire length up to 100 ft. The built in accessory jack allows for additional sensors or a high-water float.
- Battery operated alarm can detect as little as 1/32 in. of water
- Produces a loud 110 dB alarm that can be heard throughout the house to provide an effective early warning system
- Use in a variety of locations: in a sump pit, near water heaters, refrigerators or dishwashers, next to washing machines, under sinks, close to air conditioner drain tubes or wherever there is a risk of water damage
- Sensor wire extends 6 ft. and can be lengthened for hard to reach areas, accommodates the addition of more than 100 ft. of wire (additional 24-Gauge wire not included)
- Built in accessory jack allows for an additional 360 degree water sensor PS-WS360 or a high water float PS-WS (Item 3570418)
- Battery-saver feature only uses energy when the alarm is sounding to offer a long battery life
- Requires 9-Volt battery (not included)
- 5 Year limited warranty
Asurity ULTRA Series 120V Condensate Pump, 22 ft Lift. Translucent Tank For Easy & Fast Inspection. 22 ft maximum lift height. LED Indicators Confirm Pump Status. Built-in Safety Overflow Switch. Removable Check Valve for Easy Cleaning. Suitable for condensate up to 160degree F. Vibration dampening feet and motor mounts minimize sound. Mfg #ULTRACP-22
- Translucent Tank For Easy & Fast Inspection
- 22 ft maximum lift height
- LED Indicators Confirm Pump Status
- Built-in Safety Overflow Switch
for Use with All Brands of Sump and Sewage Pumps upto 1/2 HP,115-Volt, 13 Amp. Includes 10 ft. Cord. Ideal for 14 in. Dia or larger sump basins.
- Tethered style float switch has 10 ft. cord
- Replaces most standard float switches
- Ideal for 14 in. Dia or larger sump basins
- Piggyback-style plug with 10' cord, mounting strap included
Utility water test gauge. This gauge is used for pressure tests of residential and commercial water lines. This gauge has a 300 psi scale and a 3/4 in. female swivel connection for water lines.
- 3/4 in. female copper alloy swivel connection for water lines
- Top mounted to make it easy to read when connected
- Accuracy 3-2-3% of span, ASME B40.1 grade B
- 2-1/2 in. dial and 300 psi standard
Red spirit filled economy thermometer for commercial and industrial applications. This thermometer has a 5 in. scale and 2/125 in. copper alloy stem. The temperature range is 40/280 degree F and 15/135 degree C.
- Scale size 5 in. (127 mm) white painted steel with black markings
- Accuracy +/-1 scale division
- Scale dual scale degree F and degree C temperature range 40/280 degree F and 15/135 degree C
- Well brass or steel - includes thermowell
The VCMA-15ULS has 1/2 Gal. tank capacity. Little Giant VCMA Series is ideal for collecting, detecting and the automatic removal of condensate from air conditioning equipment, de-humidifiers, high efficiency furnaces, condensing boilers and other equipment where an automatic drain pump is required. Also suitable for high efficiency oil and gas-fired condensing furnace and condensing boiler equipment.
- 1/50 HP high performance motor
- ABS tank, motor cover and volute
- Stainless steel pump shaft
- Snap-action pump switch
- Removable 3/8 in. barbed check valve
- Safety switch included
- Maintenance free - no need to add battery fluid or distilled water
- Compatible with all new PHCC Pro Series backup products
- Up to 50 hours of protection (based on a 10% duty cycle) on the PS-C33 combination and PHCC-2400 battery backup sump pump system
- Up to 60 hours of protection (based on a 10% duty cycle) on the PS-C22 combination and PHCC-1730 battery backup sump pump system
- Up to 100 hours of protection (based on a 10% duty cycle) on the PS-C11 combination and PHCC-1000 battery backup sump pump system
- Runs pump intermittently for days
Its hollow core provides a high knot retention and is easy to splice. The fiber is treated with UV stabilizers for sunlight durability. Floats on water, retains strength when wet and may be stored wet without damage.
- Floats on water, retains strength when wet and may be stored wet without damage
- High resistance to abrasion, mildew, oil, grease, gasoline, marine growth and many chemicals
- Best for tie-downs, utility hand lines, pulling lines, ladder lines and marine uses
- Lightweight flexibility
- 100% monofilament fibers
Pump A Way is a durable and efficient hand pump for numerous applications inside and outside the home. The pump is manufactured of high quality impact and chemical resistant materials. Use for your entire pump project around the house. The Pump A Way is easy to use with each stroke pumping a whopping 32 oz. of liquid.
- Pump is manufactured of high quality impact and chemical resistant materials
- Some projects include removing waters from washing machines, dishwashers, sinks, showers, tubs, basins, valve boxes, condensation or drip pans, and sumps
- Pump removes a Gal. of liquid per 4 strokes
- Pump will not rust or corrode; pump is made of durable PVC
- Not made with NSF-14 (food grade) materials and is not recommended for food-based liquids
