Hvac
Valve core with Teflon seal. Compatible with most refrigerants. Industry standard valve cores.
- Replaces SF1515
- Steel construction
- Use with most refrigerants
- Neoprene seal
T1 Pro non-programmable thermostat for 24 VAC systems, single stage heat and cool systems. Works with Single stage heat pumps without aux heat. Includes mounting system, thermostat and mounting plate.
- Uses the UWP mounting system that's standard across all t series thermostats
- Adaptive intelligent recovery
- Works with 24 VAC systems, gas, oil, electric warm air, hot water coil, gas, oil, electric hydronic, or steam/gravity systems
- Easily upgradable
The T Series programmable thermostat streamlines everything from product selection and installation to customer service and support. Standard footprint and simple interface. Uses the UWP mounting system that's standard across all T Series thermostats.
- 7-day, 5-2, 5-1-1 or non-programmable
- Simple push-button functionality
- Filter change reminders
- Easy upsell to a connected lyric T6 Pro Wi-Fi when your customer is ready for Wi-Fi (C-wire required)
1/8 in. IPS male thread connection. Use screwdriver or coin to operate. 5 years warranty against defect.
- Air vent
- Hot water
- Valve only
- Nickel plated
- Silver
- Specifications
- Safety
- 125 psi
- Fits 1/8 in. threads
- Meets ASME standards
The Master Flow 8 in. x 7 in. Round Reducer is made of galvanized steel. It features hemmed collar edges for enhanced strength and a secure fit. The reducer is used to transition from a 8 in. pipe to a 7 in. pipe in an HVAC system. It is suitable for most HVAC applications.
- Hemmed collar edges for an improved fit and increased strength
- Connects 8 in. pipe to 7 in. pipe in duct run
- Seal seams with code-approved mastic, sealant or duct tape (sold separately)
- Always insulate ductwork for greater system efficiency and comfort (insulation not included)
The GOODMAN concentric vent termination kit is an optional accessory for use with GOODMAN furnaces of 90% AFUE or higher (furnaces requiring PVC vent piping). The kit makes it possible to use the optimal 2-pipe installation for these furnaces while only cutting 1 hole through the wall or roof. Instead of a separate hole for the exhaust pipe and a separate hole for the combustion air intake pipe, this kit merges the 2 pipes into a single concentric vent pipe which passes through the wall or roof. A specially designed rain cap draws combustion air in from 1 direction while directing exhaust in another direction.
- Required vent size: 2 in.
- Diameter of terminating pipe: 3.5 in.
- Required diameter of opening: 4 in.
- Length of termination kit: 33.5 in.
T-437 RADIATOR VALVE 1-1/2 IN
This filter has MERV 13 Efficiency. The MERV 13 rating makes it LEED compliant. The High Efficiency in 2 in. depth and advanced media incorporating both charged fibers and traditional mechanical principles provides superior filtration.
- MERV 13
- Meets requirement for LEED
- Meets guidelines for COVID-19
- Charged media
Long Term 100% Condensate Activated Release with No Waste, No Residue. State Of The Art, Water Based, Polymer Formula Is Biodegradable and Computer Room Safe. Description: 6 Oz. Bag.
Eaton offers the most complete line of Definite Purpose (DP) contactors in the industry. Designed for heating, ventilation, air conditioning and refrigeration (HVACR) applications, Eatons DP contactors are designed to handle the most challenging installations. Eatons DP Contactors offer an efficient design with low VA coil ratings and straight-through wiring.
- These ampere and horsepower rated devices from Eatons electrical sector are subjected to stringent quality assurance inspections and testing procedures
- 15-360a contractors ratings
- Single-, 2-, 3- and 4 pole configurations
- Open components and enclosed designs available
This 4 in. x 20 ft. Dryer Vent Duct is ideal for both gas and electric dryer application. It is constructed of heavy-duty, fire resistant, 4-ply aluminum foil laminate that encapsulates a high density, corrosion resistant wire helix. This forms an air tight and easy to use air duct.
- Constructed of heavy-duty, fire resistant, aluminum foil laminate
- Constructed with a corrosion resistant, wire helix
- Duct is airtight
- Will not support combustion
- Note: per UL2158A only ducts 8 or less can be UL marked
1/2 in. Flip angle all brass construction soft seat globe-type valve eliminates porosity problem. This product was tested at 80 psi for body leakage and seat tested at 1.5 psi . This includes Key precision forged valve body 83 950 BTU.
- 1/2 in. fip
- Angle
- All brass construction
- Soft seat globe-type valve
- Eliminates porosity problem
- Tested at 80 psi for body leakage, seat tested at 1.5 psi
- Includes key
- Precision forged valve body
- 83,950 BTU
Heat/cool - 2 heat, 1-cool 1st stage heat - compressor contactor 2nd stage heat - auxiliary heat cool - compressor contactor 5 Plus1 Plus1 - Day Programmable. Powersource - Hardwire. Energy Management Recovery LCD with backlight Selectable Celsius or Fahrenheit temperature display Includes B/O terminals Electronic accuracy 80 Series residential and light commercial - heat pump application.
- Emerson classic 80 series, 2H/1C digital heat pump thermostat
- 5+1+1 programmable
- Backlit display
- Filter change reminder
- Hardwired (24-Volt)
This 4 in. x 25 ft. flexible aluminum foil duct is ideal for bathroom fan exhausting and other general-purpose exhaust applications. 3 layers of aluminum foil laminate are included in its composition that will withstand up to 250 degree F temperatures. This product has been rated as an air duct connector under UL 181 and should never be used for dryer venting purposes.
- Made from 3 ply aluminum foil laminate
- Maximum operating temperature of this product is 250 degree F
- Product should never be used for dryer venting applications
- Rated as a ul 181 class 1 flexible air duct connector
- Single stage - 1 - heat, 1 - cool (gas/oil/electric)
- Mercury Free
- Sealed-in-glass switch design requires no leveling, and provides optimum protection from contamination
- Compatible with most 24 Vac heating and/or cooling systems
- 400 Series contractor model is same high quality thermostat.
This filter has MERV 13 Efficiency. The MERV 13 rating makes it LEED compliant. The High Efficiency in 2 in. depth and advanced media incorporating both charged fibers and traditional mechanical principles provides superior filtration.
- MERV 13
- Meets requirement for LEED
- Meets guidelines for COVID-19
- Charged media
- Have the correct size reamer when you need it
- Kit contains 1 each of #20 through #90 gauging reamers
- Includes a slim plastic carrying case
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
When you need a motor run capacitor that delivers the extended life your customers demand and the value you desire, you know its time to go PRO. Titan PRO Professional Grade Motor Run Capacitors get the job done by outperforming standard motor run capacitors of similar value by 83%! Built to the toughest international compliance standards for AC motor run capacitors
- 60,000 hours operational life
- Built to the toughest international standards for AC motor run capacitors including EIA-456-A and IEC
- 100% electrical testing
- Heavy-edged metalized polypropylene film is used for the dielectric
- Oil filled
- Non PCB oil
- Insulated terminals
- Hertz:50/60
MERV 11 Efficiency, 100% Synthetic Media, UL Classified, media laminated to an expanded metal grid, heavy0duty moisture resistant die-cut frame, diagonal front and back retainers
The self-supported pleated air filter is a MERV 8 Pleated filter which uses 100% synthetic media and requires no wire backing. This provides both equipment protection and improved indoor air quality. High strength frame provides a filter which holds up in various HVAC conditions.
- MERV 8
- Self-supported design
- Standard capacity
- Typically lasts 90 days or more
Eaton offers the most complete line of Definite Purpose (DP) contactors in the industry. Designed for heating, ventilation, air conditioning and refrigeration (HVACR) applications, Eatons DP contactors are designed to handle the most challenging installations. They offer an efficient design with low VA coil ratings and straight-through wiring.
- Ampere and horsepower rated devices from Eatons electrical sector are subjected to stringent quality assurance inspections and testing procedures
- 15-360a contractors ratings
- Single-, 2-, 3- and 4 pole configurations
- Open components and enclosed designs available
Honeywell -- white. Provides low-voltage 24 VAC control of two-stage heating and one-stage cooling. Mercury switch, temperature at a glance, indicator lights tell when the system is in emergency or auxiliary heat modes. Plastic levers click easily into heat, off, cool or emergency heat modes. EcoSource Exclusive. Min. Order: 1 EA
When you need a motor run capacitor that delivers the extended life your customers demand and the value you desire, you know its time to go PRO. Titan PRO Professional Grade Motor Run Capacitors get the job done by outperforming standard motor run capacitors of similar value by 83%! Built to the toughest international compliance standards for AC motor run capacitors
- 60,000 hours operational life
- Built to the toughest international standards for AC motor run capacitors including EIA-456-A and IEC
- 100% electrical testing
- Heavy-edged metalized polypropylene film is used for the dielectric
- Oil filled
- Non PCB oil
- Insulated terminals
- Hertz:50/60