Siemens PN Series Load Centers - a high quality and feature-rich line of load center products designed to meet applications for virtually every need. The PN Series load center provides maximum flexibility in combination with labor saving features to aid the contractor while installing the product. PN Series load centers accept the plug-on neutral breakers, patented insta-wire neutral/ground system, convertibility, copper bussing and mounting tabs on the trim - these features were specifically engineered to decrease installation time and increase flexibility.

• Features siemens plug-on neutral, for simple quick installation, that is spacious with over 4 in. of wire bending space, and a secure reliable installation method
• PN Series plug-on neutral load center includes 2 factory installed ground bars
• Single phase load center
• Tin plated copper bus
• NEMA Type 1 enclosure
• Grey trim
• Interrupt rating: 22000 AIC
• UL Listed

The Square D Electric Homeline Value Pack 200 Amp 30-Space 60-Circuit Indoor Convertible Main Breaker Load Center provides safety and value to contractors, remodelers or homeowners. It's built with a plated, aluminum bus bar that's compatible with Square D Homeline circuit breakers. These breaker boxes are designed for fast installation and wire savings. This breaker is fully distributed and UL listed for residential and commercial power distribution.

• Plug-On Neutral Design: Features a fully distributed neutral bar, allowing for the installation of Homeline plug-on neutral combination arc fault breakers in any space
• Wide Breaker Compatibility: Each pole space supports Square D Homeline full-size, tandem, or quad breakers, offering flexibility for your electrical setup
• Ground and Neutral Bar Capacity: Accepts up to (3) #10-14 equipment grounds for enhanced wiring versatility
• Value Pack Components: Includes (3) HOM120 Homeline 20 Amp single-pole circuit breakers, (2) HOM230 Homeline 30 Amp double-pole circuit breakers, and a combination flush/surface cover
• Supports Surge Protection: Accommodates a plug-on secondary surge arrestor (sold separately) for added electrical safety
• Overhead or Underground Feed: Install easily by rotating the device to match your feed type
• Single-Phase Indoor Main Breaker Panel: Designed for 120/240 VAC systems with a 22,000 AIR short circuit current rating
• Rated 120/240 VAC and 22,000 AIR short circuit current rating
• Automatic Flush Adjusting Cover: Reduces installation time with an easy-to-use, adjustable cover
• Straight-In Mains Design: Saves on expensive cable and reduces installation time
• Enhanced Wiring Flexibility: Distributed split branch neutral includes terminal screws backed out, offering up to 50% more terminals than UL standards require
• Rugged Thermoplastic Interior: Built with durable materials to withstand heavy use
• User-Friendly Screws: Slot/square drive screws allow for standard flat blade or square-head screwdrivers, ensuring proper torque
• Removable Interior for Security: Protects from damage or theft on the job site with a single captive screw for easy removal
• Customizable Ground Bar Locations: Three ground bar mounting locations (left, right, and end) for easy wiring access

The Square D Homeline Value Pack is a 125 Amp 12-Space 24-Circuit Outdoor Convertible Main Breaker Load Center with cover for Plug-on Neutral breakers includes a selection of breakers and is UL listed for residential and commercial power distribution. This load center includes (3) HOM120 Homeline 20 Amp single-pole circuit breakers, (2) HOM230 Homeline 30 Amp double-pole circuit breakers and a rainproof outdoor cover, built with a plated, aluminum bus bar that is tested and listed only for Homeline circuit breakers. Homeline load centers are designed for the value-minded contractors, remodelers, builders and homeowners. Homeline load centers are engineered for fast installation and wire savings.

• Each pole space accepts full-size, tandem or quad breakers
• Ground and neutral bars accept up to (3) #10-14 equipment grounds
• Includes (3) HOM120 Homeline 20 Amp single-pole circuit breakers, (2) HOM230 Homeline 30 Amp double-pole circuit breakers and a rainproof outdoor cover
• Accommodates plug-on secondary surge arrestor (sold separately)
• Main feeders terminate from the top, feeders can enter from any direction, however, device cannot be rotated
• Single phase
• Rated 120/240 VAC and 22,000 AIR short circuit current rating
• Rainproof cover features a stainless steel hasp that is easily padlocked for safety from theft
• Designed with straight-in mains to save expensive cable and time
• Distributed split branch neutral with terminal screws backed out offering with up to 50% more terminals than UL requires increases wiring flexibility saving installation time and simplifies wiring
• Thermoplastic interior assembly is among the most rugged in the industry
• Slot/square drive screws let you use either standard flat blade screwdriver or square-head driver for positive drive and proper torque
• For protection from damage or theft on the job site, interiors can be easily removed with a single captive screw
• 3-ground bar mounting locations (left, right and end) let you pick the easiest spot to wire

The Square D Homeline 100 Amp 6-Space 12-Circuit Outdoor fixed Main Lugs Load Center is UL listed for residential and commercial power distribution. This load center is built with a plated, aluminum bus bar that is tested and is compatible with Square D Homeline circuit breakers. Homeline load centers are designed for the value-minded contractors, remodelers, builders and homeowners. Square D Homeline breaker boxes are engineered for fast installation and wire savings.

• Durable Outdoor Design: Square D Homeline 100 Amp 6-Space 12-Circuit Outdoor Main Lug Load Center with a rainproof cover for reliable outdoor use
• Includes a rainproof outdoor cover
• Supports Secondary Surge Protection: Compatible with plug-on secondary surge arrestors (sold separately) for enhanced electrical safety
• Flexible Wiring Options: Main feeders terminate from the top, with feeder entry possible from any direction (device is not rotatable)
• Easy Wire Installation: Features knockouts on all sides of the breaker box for quick and hassle-free wire routing
• Single-Phase, Outdoor Rated: Designed for outdoor installation with a 120/240 VAC rating and 10,000 AIR short circuit current rating
• Rated 120/240 VAC and 10,000 AIR short circuit current rating
• Secure and Theft-Resistant: Includes a rainproof cover with a stainless steel hasp that can be padlocked for added safety
• Rugged Construction: Thermoplastic interior assembly offers industry-leading durability for long-term use
• Convenient Screw Design: Slot/square drive screws allow use of either a flat blade or square-head screwdriver for secure and precise installation
• Customizable Grounding Options: Includes 3 ground bar mounting locations (left, right, and end) for ease of wiring

The Square D Homeline 100 Amp 6-Space 12-Circuit Indoor Flush Mount Convertible Main Lugs Load Center is UL listed for residential and commercial power distribution. This load center is built with a plated, aluminum bus bar that is tested and listed only for Homeline circuit breakers. Homeline load centers are designed for the value-minded contractors, remodelers, builders and homeowners. Homeline load centers are engineered for fast installation and wire savings.

• Includes flush mount cover without a door
• Accommodates plug-on secondary surge arrestor (sold separately)
• Overhead/underground feed simply by rotating the device before installing
• Single phase
• Rated 120/240 VAC and 10,000 AIR short circuit current rating
• Flush mount device cover without a door
• Thermoplastic interior assembly is among the most rugged in the industry
• Slot/square drive screws let you use either standard flat blade screwdriver or square-head driver for positive drive and proper torque
• 3-ground bar mounting locations (left, right and end) let you pick the easiest spot to wire

The Square D Homeline pack includes a 50 Amp Homeline Outdoor Metallic Load Center and an installed Square D Homeline breaker - HOM250GFI. Along with many other features and benefits, the Square D HOM250GFI 2-Pole Ground Fault Circuit (GFCI) Breaker protects single pole and 2 pole loads against ground and overcurrent faults. The load center and GFCI breaker provide protection for outdoor circuits such as hot tubs, fountains, swimming pools or spas.

• Homeline hot tub/pool/spa pack provides protection for outdoor circuits such as hot tub, fountains, swimming pools or spas
• Includes: HOM250GFI- 50 Amp 2-pole Homeline ground fault circuit interrupter installed in (HOM2-4L50R) - 50 Amp outdoor load center
• Painted, zinc-coated steel outdoor enclosure
• Cover can be padlocked
• Main lug load center designed for applications up to 50 Amp 120/240 VAC
• 3.0/7.5 HP 240 VAC 3 phase (standard/maximum) or corner grounded delta system refer to data bulletin 2700DB0202

The Square D Homeline 100 Amp 6-Space 12-Circuit Indoor Surface Mount Convertible Main Lugs Load Center is UL listed for residential and commercial power distribution. This load center is built with a plated, aluminum bus bar that is tested and is compatible with Square D Homeline circuit breakers. Homeline load centers are designed for the value-minded contractors, remodelers, builders and homeowners. Square D Homeline breaker boxes are engineered for fast installation and wire savings.

• Compact and Efficient Design: Square D Homeline 100 Amp 6-Space 12-Circuit Indoor Surface Mount Main Lug Load Center is perfect for indoor electrical applications
• Surface Mount Cover Included: Comes with a durable surface mount cover for added convenience and protection
• Supports Surge Protection: Compatible with plug-on secondary surge arrestors (sold separately) to enhance electrical safety
• Flexible Wiring Options: Features knockouts on all sides of the breaker box for hassle-free wire installation
• Single-Phase, Indoor Use: Designed for single-phase indoor installations, rated 120/240 VAC with a 10,000 AIR short circuit current rating
• Rated 120/240 VAC and 10,000 AIR short circuit current rating
• Open Cover Design: Surface mount cover without a door provides easy access to circuit breakers
• Rugged Construction: Thermoplastic interior assembly ensures industry-leading durability for long-term use
• User-Friendly Installation: Slot/square drive screws accommodate both flat blade and square-head screwdrivers for secure and efficient installation

Siemens PN Series Load Centers - a high quality and feature-rich line of load center products designed to meet applications for virtually every need. The PN Series load center provides maximum flexibility in combination with labor saving features to aid the contractor while installing the product. PN Series load centers accept the plug-on neutral breakers, patented insta-wire neutral/ground system, convertibility, copper bussing and mounting tabs on the trim - these features were specifically engineered to decrease installation time and increase flexibility.

• Features siemens plug-on neutral, for simple quick installation, that is spacious with over 4 in. of wire bending space, and a secure reliable installation method
• PN Series plug-on neutral load center includes 2 factory installed ground bars
• Single phase load center
• Tin plated copper bus
• NEMA Type 1 enclosure
• Grey trim
• Interrupt rating: 100000 AIC
• UL Listed

Leviton is proud to bring the Load Center into the 21st century with a focus on improved safety and ease of installation. Thanks to its revolutionary design, all hot and neutral wires terminate at custom lugs in the panel, rather than at the circuit breaker*, which allows the entire panel to be wired at rough-in. Branch circuit breakers are simply plugged-in at final installation, increasing jobsite efficiency. Available in a variety of sizes and configurations, Leviton offers a complete portfolio of Load Centers to meet the needs of any job.

• EASY - The Load Center can be wired without any breakers present
• SUPERIOR CONDUCTIVITY - Comes standard with tin plated copper bus
• ORGANIZED - Notches for cable ties promote secure and neat wiring
• MODERN DESIGN - White powder coated finish for a sleek appearance

Eaton's Cutler-Hammer Type CH Load centers (also known as a breaker box) include a 1-piece copper bus. This absence of bolted connections virtually eliminates the chance of hot spots or faults, ensuring a longer product life. Our standard 14-3/8 in. W enclosures fit snugly between wall studs. A variety of knockouts allows for more wiring configurations, while predrilled mounting holes provide easy installation of additional ground bars, if desired. Type CH Load centers have a lifetime warranty and accept Cutler-Hammer Type CH (3/4 in.) breakers.

• 42-space
• 200 Amp
• NEMA 3R outdoor
• Limited lifetime warranty

The Square D Homeline Value Pack 225 Amp 30-Space 60-Circuit Indoor Convertible Main Lugs Load Center for Plug-on Neutral breakers includes the cover, a selection of breakers and a ground bar. It is UL listed for residential and commercial power distribution. This load center is built with a plated, aluminum bus bar that is tested and is compatible with Square D Homeline circuit breakers. Homeline load centers are designed for the value-minded contractors, remodelers, builders and homeowners. Square D Homeline breaker boxes are engineered for fast installation and wire savings.

• Square D Homeline 225 Amp 30-Space 60-Circuit Indoor Main Lug Plug-On Neutral Load Center with Cover, Ground Bar - Value Pack
• Includes a fully distributed neutral bar, allowing for the installation of Homeline plug-on neutral breakers on any space
• Each pole space accepts full-size, tandem or quad breakers
• Ground and neutral bars accept up to (3) #10-14 equipment grounds
• Includes PKGTALP2 ground bar kit (PK9GTA and PK18GTAL) and (3) HOM120 Home line 20 Amp single-pole circuit breakers, (2) HOM230 Homeline 30 Amp double-pole circuit breakers and a combination flush/surface cover
• Accommodates plug-on secondary surge arrestor (sold separately)
• Overhead/underground feed simply by rotating the device before installing
• Single phase
• Rated 120/240 VAC and 65,000 AIR short circuit current rating
• Automatic flush adjusting cover requires less time to complete the job
• Designed with straight-in mains to save expensive cable and time
• Distributed split branch neutral with terminal screws backed out offering with up to 50% more terminals than UL requires increases wiring flexibility saving installation time and simplifies wiring
• Thermoplastic interior assembly is among the most rugged in the industry
• Slot/square drive screws let you use either standard flat blade screwdriver or square-head driver for positive drive and proper torque
• For protection from damage or theft on the job site, interiors can be easily removed with a single captive screw
• 2-equipment ground bars are factory-included for field mounting in 3 locations (left, right and end) letting you pick the easiest spot to wire

Siemens SN Series Load Center is the smart choice when value and quick installation are of highest priority. The SN Series load centers include labor saving features such as the ability to accept Plug-on neutral breakers, patented Insta-wire and mounting trim tabs. These exclusive features make the SN Series load center the best load center for the value minded contractor.

• Features Siemens plug-on neutral, for simple quick installation, that is spacious with over 4 in. of wire bending space, and a secure reliable installation method
• SN series plug-on neutral load center includes 1 factory installed ground bars
• Single phase load center
• Aluminum bus
• NEMA type 3R enclosure
• Grey trim/ feed thru lugs
• Interrupt rating: 22000 AIC
• UL Listed

Siemens PN Series Load Centers - a high quality and feature-rich line of load center products designed to meet applications for virtually every need. The PN Series load center provides maximum flexibility in combination with labor saving features to aid the contractor while installing the product. PN Series load centers accept the plug-on neutral breakers, patented insta-wire neutral/ground system, convertibility, copper bussing and mounting tabs on the trim - these features were specifically engineered to decrease installation time and increase flexibility.

• Features siemens plug-on neutral, for simple quick installation, that is spacious with over 4 in. of wire bending space, and a secure reliable installation method
• PN Series plug-on neutral load center includes 2 factory installed ground bars
• Single phase load center
• Tin plated copper bus
• NEMA Type 1 enclosure
• Grey trim
• Interrupt rating: 100000 AIC
• UL Listed

Siemens PN Series Load Centers - a high quality and feature-rich line of load center products designed to meet applications for virtually every need. The PN Series load center provides maximum flexibility in combination with labor saving features to aid the contractor while installing the product. PN Series load centers accept the plug-on neutral breakers, patented insta-wire neutral/ground system, convertibility, copper bussing and mounting tabs on the trim - these features were specifically engineered to decrease installation time and increase flexibility.

• Features siemens plug-on neutral, for simple quick installation, that is spacious with over 4 in. of wire bending space, and a secure reliable installation method
• PN Series plug-on neutral load center includes 2 factory installed ground bars
• Single phase load center
• Tin plated copper bus
• NEMA Type 1 enclosure
• Grey trim
• Interrupt rating: 100000 AIC
• UL Listed

Siemens PN Series Load Centers - a high quality and feature-rich line of load center products designed to meet applications for virtually every need. The PN Series load center provides maximum flexibility in combination with labor saving features to aid the contractor while installing the product. PN Series load centers accept the plug-on neutral breakers, patented insta-wire neutral/ground system, convertibility, copper bussing and mounting tabs on the trim - these features were specifically engineered to decrease installation time and increase flexibility.

• Features siemens plug-on neutral, for simple quick installation, that is spacious with over 4 in. of wire bending space, and a secure reliable installation method
• PN Series plug-on neutral load center includes 2 factory installed ground bars
• Single phase load center
• Tin plated copper bus
• NEMA Type 1 enclosure
• Grey trim
• Interrupt rating: 22000 AIC
• UL Listed

Specially designed for easy installation, Eaton's CH plug on neutral load centers house the branch circuit breakers and the wiring required to distribute power to individual circuits. This is a convertible main load center. The branch breakers protect the wires leading to individual electrical loads such as fixtures and outlets.

• Amperage rating: 225 Amp
• Bus material: copper
• Rated NEMA 1 for indoor use
• Feed type: overhead or underground

The Square D Homeline Value Pack 150 Amp 30-Space 60-Circuit Indoor Convertible Main Breaker Load Center for Plug-on Neutral breakers includes the cover and a selection of breakers. It is UL listed for residential and commercial power distribution. This load center is built with a plated, aluminum bus bar that is tested and is compatible with Homeline circuit breakers. Square D Homeline load centers are designed for the value-minded contractors, remodelers, builders and homeowners. Homeline breaker boxes are engineered for fast installation and wire savings.

• Includes a fully distributed neutral bar, allowing for the installation of Homeline plug-on neutral combination arc fault breakers on any space
• Each pole space is compatible with a Square D Homeline full-size, tandem or quad breakers
• Ground and neutral bars accept up to (3) #10-14 equipment grounds
• Includes (3) HOM120 Homeline 20 Amp single-pole circuit breakers, (2) HOM230 Homeline 30 Amp double-pole circuit breakers and a combination flush/surface cover
• Accommodates plug-on secondary surge arrestor (sold separately)
• Overhead/underground feed simply by rotating the device before installing
• Single phase, Indoor Main Breaker Homeline Breaker Box
• Rated 120/240 VAC and 22,000 AIR short circuit current rating
• Automatic flush adjusting cover requires less time to complete the job
• Designed with straight-in mains to save expensive cable and time
• Distributed split branch neutral with terminal screws backed out offering with up to 50% more terminals than UL requires increases wiring flexibility saving installation time and simplifies wiring
• Thermoplastic interior assembly is among the most rugged in the industry
• Slot/square drive screws let you use either standard flat blade screwdriver or square-head driver for positive drive and proper torque
• For protection from damage or theft on the job site, interiors can be easily removed with a single captive screw
• 3-ground bar mounting locations (left, right and end) let you pick the easiest spot to wire

This is a Type CH loadcenter cover for select Type CH loadcenters. Eaton's Type CH 3/4 in. load centers enclose CH breakers for power distribution and circuit protection in residential and light commercial applications. This loadcenter cover is sandalwood colored to match the CH panel.

• Indoor covers for Eaton's type CH loadcenters are ordered separately
• Type CH loadcenters and covers are sandalwood colored
• All trims are finished using an electrostatic powder coat, baked urethane paint process
• Eaton's CH loadcenters include a limited lifetime warranty

The Siemens EQ 125 Amp 8-Space 16-Circuit Main Lug Outdoor Load Center is NEMA 3R rated for outdoor use and has a hinged door that can be removed by backing-out 1 screw. The load center features a 1-piece copper buss bar that offers excellent conductivity and is ideal for use where the environment can become severe, such as on farms and near coastal areas. Suitable for use as service equipment when a main breaker (125 Amp maximum) is back-fed in a branch position and used with main breaker retainer clip No.

• For use as a main lug load center
• Suitable for use as service entrance equipment when a main breaker is installed
• NEMA 3R rated for outdoor use
• G90 hot-dipped, galvanized-carbon-steel enclosure helps provide corrosion protection and has a hinged door that can be removed by backing out 1 screw
• Powder coating of polyester paint using electrostatic process enhances corrosion protection and gives a great-looking finish, free of drips and runs
• 1-piece copper buss bar is designed for use only with circuit breakers (not included) and offers excellent conductivity
• Single phase
• 3-wire
• 120/240 VAC
• 100,000 AIR
• Insta-wire for quick conductor installation
• Ideal for use where the environment can become severe, such as on farms and near coastal areas
• ANSI certified and UL listed
• Convertible from a main lug load center to a main breaker load center
• Interior offers removal in seconds
• Combination trim box in 1-package
• Positive load-side circuit-breaker hook rails
• Uses type HS hubs (not included)

Siemens SN Series Load Center is the smart choice when value and quick installation are of highest priority. The SN Series load centers include labor saving features such as the ability to accept Plug-on neutral breakers, patented Insta-wire and mounting trim tabs. These exclusive features make the SN Series load center the best load center for the value minded contractor. It includes three Q120 1-Pole 20A and one Q230 2-Pole 30A breakers. It is spacious with over 4 inches of wire bending space. The sturdy hook-rail and reliable connection improves its security.

• Features siemens plug-on neutral, for simple quick installation, that is spacious with over 4 in. of wire bending space, and a secure reliable installation method
• SN Series plug-on neutral load center includes 1 factory installed ground bars
• Single phase load center
• Aluminum bus
• NEMA Type 1 enclosure
• Grey trim/ value pack
• Interrupt rating: 22000 AIC
• UL Listed

Siemens SN Series Load Center is the smart choice when value and quick installation are of highest priority. The SN Series load centers include labor saving features such as the ability to accept Plug-on neutral breakers, patented Insta-wire and mounting trim tabs. These exclusive features make the SN Series load center the best load center for the value minded contractor.

• Features Siemens plug-on neutral, for simple quick installation, that is spacious with over 4 in. of wire bending space, and a secure reliable installation method
• SN series plug-on neutral load center includes 1 factory installed ground bars
• Single phase load center
• Aluminum bus
• NEMA type 3R enclosure
• Grey trim
• Interrupt rating: 100000 AIC
• UL Listed

Quick, easy and clean describe the new plug-on neutral design attributes offered by Eaton. Time saving features offer a quick installation equating to less time on the job. Designed to maximize installation efficiency and to provide additional convenience allowing for an easy installation. New features that help ensure an aesthetically clean and professional installation.

• Amperage rating: 125 Amp
• Cover: cover included
• Enclosure: NEMA 1
• Bus material: aluminum
• Used with type BR 1 in. breakers
• BR type plug-on neutral breaker box eliminates the pigtail connection providing time and labor savings
• Dedicated neutral bus for breaker connection
• In-board neutral bar increases gutter space to allow for professional installation of conductors
• Backed out neutral screws allows for quick connection of neutral and ground conductors
• Optimized knockout locations for additional access and easier to remove
• Self-leveling tabs allow for quick drywall offset and helps simplify installation
• Keyhole hanging feature allows for ease of cover installation for both top and bottom feed applications
• Rigid cover spine provides strength when twist outs are removed allowing for easier removal
• Eaton offers a full line of circuit breakers to meet all your protection needs including arc fault, ground fault, dual function and surge protection

This is a Type CH loadcenter cover for select Type CH loadcenters. Eaton's Type CH 3/4 in. load centers enclose CH breakers for power distribution and circuit protection in residential and light commercial applications. This loadcenter cover is sandalwood colored to match the CH panel.

• Indoor covers for Eaton's type CH loadcenters are ordered separately
• Type CH loadcenters and covers are sandalwood colored
• All trims are finished using an electrostatic powder coat, baked urethane paint process
• Eaton's CH loadcenters include a limited lifetime warranty

Siemens PN Series Load Centers - a high quality and feature-rich line of load center products designed to meet applications for virtually every need. The PN Series load center provides maximum flexibility in combination with labor saving features to aid the contractor while installing the product. PN Series load centers accept the plug-on neutral breakers, patented insta-wire neutral/ground system, convertibility, copper bussing and mounting tabs on the trim - these features were specifically engineered to decrease installation time and increase flexibility.

• Features siemens plug-on neutral, for simple quick installation, that is spacious with over 4 in. of wire bending space, and a secure reliable installation method
• PN Series plug-on neutral load center includes 2 factory installed ground bars
• Single phase load center
• Copper bus
• NEMA Type 1 enclosure
• Grey trim
• Interrupt rating: 22000 AIC
• UL Listed

Siemens PN Series Load Centers - a high quality and feature-rich line of load center products designed to meet applications for virtually every need. The PN Series load center provides maximum flexibility in combination with labor saving features to aid the contractor while installing the product. PN Series load centers accept the plug-on neutral breakers, patented insta-wire neutral/ground system, convertibility, copper bussing and mounting tabs on the trim - these features were specifically engineered to decrease installation time and increase flexibility.

• Features siemens plug-on neutral, for simple quick installation, that is spacious with over 4 in. of wire bending space, and a secure reliable installation method
• PN Series plug-on neutral load center includes 2 factory installed ground bars
• Single phase load center
• Tin plated copper bus
• NEMA Type 1 enclosure
• Grey trim
• Interrupt rating: 22000 AIC
• UL Listed

The Square D 100 Amp 10-Space 20-Circuit Outdoor Combination meter Socket and Main Breaker Load Center, Model SO1020M100S, is suitable for use as a combination service entrance device (CSED). This unit is ANSI certified and UL listed with a maximum 10,000 AIR. The combination service entrance device features a Ring-type meter cover with a single-phase, 4-jaw meter socket. It is suitable for only overhead service applications. Meets EUSERC Specifications. Surface mount. This CSED is built with a plated, aluminum bus bar that is tested and is compatible with Square D Homeline circuit breakers, except Plug-On Neutral breakers. Homeline CSEDs are designed for the value-minded contractors, remodelers, builders and homeowners. Square D Homeline CSEDs are engineered for fast installation and wire savings.

• Square D Homeline 100 Amp 10-space 20-circuit ring-type surface mount main breaker CSED
• Includes (3) HOM120 Homeline 20 Amp single-pole circuit breakers and (1) HOMT2020CP Homeline 2-20 Amp single-pole tandem breaker
• Suitable for use as service entrance equipment
• Accommodates plug-on secondary surge arrestor and features a plug-in design for easy installation
• Ring-type design with no bypass
• Compatible with Square D Homeline circuit breakers except Plug on Neutral
• NEMA type 3R enclosure for outdoor use
• 4-jaw meter socket included in design
• Designed with straight-in mains to save expensive cable and time
• Thermoplastic interior assembly is among the most rugged in the industry
• Slot/square drive screws let you use either standard flat blade screwdriver or square-head driver for positive drive and proper torque
• UL Listed and ANSI certified

The Square D by Schneider Electric 200 Amp 20-Space 40-Circuit Outdoor Combination meter Socket and Main Breaker Load Center is suitable for use as a combination service entrance device (CSED). This unit is ANSI certified and UL listed with a maximum 22,000 AIR. The combination service entrance device features a ring-type meter cover with a single-phase, 4-jaw meter socket. It is suitable for only overhead service applications. Meets EUSERC Specifications. Surface mount. This CSED is built with a plated, aluminum bus bar that is tested and is compatible with Square D Homeline circuit breakers. Square D Homeline CSED's are designed for the value-minded contractors, remodelers, builders and homeowners. Homeline CSED's are engineered for fast installation and wire savings.

• Square D Homeline 200 Amp 20-space 40-circuit ring-type surface mount main breaker CSED
• Value Pack Combo: Includes (4) HOM120 single-pole circuit breakers, (1) HOM230CP double-pole circuit breaker, (1) HOM250CP double-pole circuit breaker, and (1) HOMT2020CP single-pole tandem breaker for a wide range of electrical needs
• Service Entrance Ready: Suitable for use as service entrance equipment, ensuring reliable and compliant installations
• Plug-On Surge Protection Compatibility: Accommodates plug-on secondary surge arrestors (sold separately) with a convenient plug-in design for quick installation
• Durable Ring-Type Design: Features a ring-type design with no bypass for streamlined operation
• Exclusive Homeline Breaker Compatibility: Designed specifically for use with Square D Homeline breakers for seamless performance
• Outdoor-Rated Enclosure: NEMA Type 3R enclosure ensures durability and protection for outdoor installations
• Integrated Meter Socket: Includes a 4-jaw meter socket for added functionality and convenience
• Straight-In Mains Design: Saves time and reduces costs with a direct cable entry system
• Rugged Construction: Thermoplastic interior assembly provides superior durability for long-term reliability
• Easy Installation: Slot/square drive screws support flat blade or square-head screwdrivers for secure and precise installation
• Certified for Safety: UL Listed and ANSI certified for trusted safety and compliance

The Siemens Industry, Inc. EQ 125 Amp 8-Space 16-Circuit Indoor Main Lug Load Center has a flush-mount design and is NEMA 1R rated for indoor use. The load center is a single-phase, 3-wire unit with an aluminum buss bar for excellent conductivity. This load center is ANSI certified and UL listed with a rating of up to 240-Volt.

• Type-G90, hot-dipped galvanized carbon steel enclosure provides corrosion protection
• Aluminum bus bar
• Interiors offer removal in seconds
• 1-piece bus bar construction designed for use with circuit breakers
• Positive load side circuit breaker hook rails
• Ideal for sub-feed applications
• Flush mount
• 120/240 VAC

Specially designed for easy installation, Eaton's BR load centers house the branch circuit breakers and the wiring required to distribute power to individual circuits. This panel is a main lug panel which is used as sub-panel to add circuits to an existing main breaker panel. Sub panels are often used in a garage, home addition, barn or storage shed and/or workshop. The branch breakers protect the wires leading to individual electrical loads such as fixtures and outlets. The BR48L125SP is a 125 Amp main lug with 4-spaces and 8-circuits.

• Amperage rating: 125 Amp
• Bus material: aluminum
• Rated NEMA 1 for indoor use
• Interrupt rating: 10 kAIC
• Mounting: surface
• Number of circuits: 8
• Number of spaces: 4
• Phase: single-phase
• Voltage rating: 120/240-Volt
• Wire size: #14-1/0 AWG Cu/Al at 60 degree C or 75 degree C
• Tangential center knockout easier installation for conduit applications
• Steel back pan provides solid and reliable breaker mounting single piece design for stability and durability
• Single keyhole mounting - provides easier mounting and leveling
• Drywall marking on enclosure - indicates proper mounting depth for flush applications
• Used with: type BR breakers

Specially designed for easy installation, Eaton's BR load centers house the branch circuit breakers and the wiring required to distribute power to individual circuits. This panel is a main lug panel which is used as sub-panel to add circuits to an existing main breaker panel. Sub panels are often used in a garage, home addition, barn or storage shed and/or workshop. The branch breakers protect the wires leading to individual electrical loads such as fixtures and outlets. The BR24L70SP is a 70 Amp main lug with 2-spaces and 4-circuits.

• Amperage rating: 70 Amp
• Bus material: aluminum
• Rated NEMA 1 for indoor use
• Interrupt rating: 10 kAIC
• Mounting: surface
• Number of circuits: 4
• Number of spaces: 2
• Phase: single-phase
• Voltage rating: 120/240-Volt
• Wire size: #8-#2 AWG Cu/Al at 60 degree C or 75 degree C
• Tangential center knockout easier installation for conduit applications
• Steel back pan provides solid and reliable breaker mounting single piece design for stability and durability
• Single keyhole mounting - one keyhole at the top and bottom provides easier mounting and leveling
• Drywall marking on enclosure - indicates proper mounting depth for flush applications
• Used with: type BR breakers

These 1 in. Load-Center Filler Plates (5-Pack) are used to fill empty spaces in a load center after the circuit breakers have been removed. The plates are ANSI certified. The plates are CSA and UL Listed.

• Use to fill empty circuit-breaker positions
• Compatible with a 1 in. load center space
• Bag contains 5 filler plates
• ANSI certified and CSA and UL Listed

The Square D Homeline 200 Amp 8-Space 16-Circuit Outdoor Convertible Main Breaker Load Center for Plug-on Neutral breakers has feed-thru lugs and is UL listed for residential and commercial power distribution. This load center is built with a plated, aluminum bus bar that is tested and is compatible with Square D Homeline circuit breakers. Homeline load centers are designed for the value-minded contractors, remodelers, builders and homeowners. Square D Homeline breaker boxes are engineered for fast installation and wire savings.

• Square D Homeline 200 Amp 8-Space 16-Circuit Outdoor Main Breaker Load Center with Feed-Thru Lug
• Includes a fully distributed neutral bar, allowing for the installation of Homeline plug-on neutral combination arc fault breakers on any space
• Each pole space accepts full-size, tandem or quad Square D Homeline breakers
• Ground and neutral bars accept up to (3) #10-14 equipment grounds
• Includes feed-thru lugs and a rainproof outdoor cover
• Accommodates plug-on secondary surge arrestor (sold separately)
• Main feeders terminate from the top, feeders can enter from any direction, however, device cannot be rotated
• Single phase, for outdoor installation
• Rated 120/240 VAC and 22,000 AIR short circuit current rating
• Rainproof cover features a stainless steel hasp that is easily padlocked for safety from theft
• Designed with straight-in mains to save expensive cable and time
• Distributed split branch neutral with terminal screws backed out offering with up to 50% more terminals than UL requires increases wiring flexibility saving installation time and simplifies wiring
• Thermoplastic interior assembly is among the most rugged in the industry
• Slot/square drive screws let you use either standard flat blade screwdriver or square-head driver for positive drive and proper torque
• For protection from damage or theft on the job site, interiors can be easily removed with a single captive screw
• 3-ground bar mounting locations (left, right and end) let you pick the easiest spot to wire

Leviton is proud to bring the Load Center into the 21st century with a focus on improved safety and ease of installation. Thanks to its revolutionary design, all hot and neutral wires terminate at custom lugs in the panel, rather than at the circuit breaker*, which allows the entire panel to be wired at rough-in. Branch circuit breakers are simply plugged-in at final installation, increasing jobsite efficiency. Available in a variety of sizes and configurations, Leviton offers a complete portfolio of Load Centers to meet the needs of any job.

• EASY - The Load Center can be wired without any breakers present
• SUPERIOR CONDUCTIVITY - Comes standard with tin plated copper bus
• ORGANIZED - Notches for cable ties promote secure and neat wiring
• MODERN DESIGN - White powder coated finish for a sleek appearance

Siemens PN Series Load Centers - a high quality and feature-rich line of load center products designed to meet applications for virtually every need. The PN Series load center provides maximum flexibility in combination with labor saving features to aid the contractor while installing the product. PN Series load centers accept the plug-on neutral breakers, patented insta-wire neutral/ground system, convertibility, copper bussing and mounting tabs on the trim - these features were specifically engineered to decrease installation time and increase flexibility.

• Features siemens plug-on neutral, for simple quick installation, that is spacious with over 4 in. of wire bending space, and a secure reliable installation method
• PN Series plug-on neutral load center includes 2 factory installed ground bars
• Single phase load center
• Copper bus
• NEMA Type 1 enclosure
• Grey trim
• Interrupt rating: 22000 AIC
• UL Listed

Quick, easy and clean describe the new plug-on neutral design attributes offered by Eaton. Time saving features offer a quick installation equating to less time on the job. Designed to maximize installation efficiency and to provide additional convenience allowing for an easy installation. New features that help ensure an aesthetically clean and professional installation.

• Enclosure: NEMA 3R
• Used with: type CH breakers
• Self-leveling tabs allow for quick drywall offset and helps simplify installation
• Optimized knockout locations for additional access and easier to remove
• Backed out neutral screws allows for quick connection of neutral and ground conductors

Siemens SN Series Load Center is the smart choice when value and quick installation are of highest priority. The SN Series load centers include labor saving features such as the ability to accept Plug-on neutral breakers, patented Insta-wire and mounting trim tabs. These exclusive features make the SN Series load center the best load center for the value minded contractor.

• Features Siemens plug-on neutral, for simple quick installation, that is spacious with over 4 in. of wire bending space, and a secure reliable installation method
• SN series plug-on neutral load center includes 1 factory installed ground bars
• Single phase load center
• Aluminum bus
• NEMA Type 1 enclosure
• Grey trim
• Interrupt rating: 22000 AIC
• UL Listed

Eaton's Cutler-Hammer Type CH Load centers (also known as a breaker box) include a 1-piece copper bus. This absence of bolted connections virtually eliminates the chance of hot spots or faults, ensuring a longer product life. Our standard 14-3/8 in. W enclosures fit snugly between wall studs. A variety of knockouts allows for more wiring configurations, while predrilled mounting holes provide easy installation of additional ground bars, if desired. Type CH Load centers have a lifetime warranty and accept Cutler-Hammer Type CH (3/4 in.) breakers.

• 42-space
• 200 Amp
• Cover included
• Lifetime warranty

Specially designed for easy installation, Eaton's CH load centers house the branch circuit breakers and the wiring required to distribute power to individual circuits. This panel is a main lug panel which is used as sub-panel to add circuits to an existing main breaker panel. Sub panels are often used in a garage, home addition, barn or storage shed and/or workshop. The branch breakers protect the wires leading to individual electrical loads such as fixtures and outlets. The CH8L125SP is a 125 Amp main lug with 8 spaces and 8 circuits.

• Amperage rating: 125
• Bus material: copper
• Rated NEMA 1 for indoor use
• Feed type: overhead or underground
• Number of circuits: 16
• Number of spaces: 8
• Phase: single-phase
• Voltage rating: 120/240
• Wire size: #6-1/0
• Tangential center knockout easier installation for conduit applications
• Steel back pan provides solid and reliable breaker mounting single piece design for stability and durability
• Single keyhole mounting - 1 keyhole at the top provides easier mounting and leveling
• Drywall marking on enclosure - indicates proper mounting depth for flush applications
• Used with: type CH breakers

Siemens PN Series Load Centers - a high quality and feature-rich line of load center products designed to meet applications for virtually every need. The PN Series load center provides maximum flexibility in combination with labor saving features to aid the contractor while installing the product. PN Series load centers accept the plug-on neutral breakers, patented insta-wire neutral/ground system, convertibility, copper bussing and mounting tabs on the trim - these features were specifically engineered to decrease installation time and increase flexibility.

• Features siemens plug-on neutral, for simple quick installation, that is spacious with over 4 in. of wire bending space, and a secure reliable installation method
• PN Series plug-on neutral load center includes 2 factory installed ground bars
• Single phase load center
• Tin plated copper bus
• NEMA Type 3R enclosure
• Grey trim/ feed thru lugs
• Interrupt rating: 22000 AIC
• UL Listed

The Square D by Schneider Electric Homeline Value Pack 200 Amp 40-Space 80-Circuit Indoor Convertible Main Breaker Qwik-Grip Load Center for Plug-on Neutral breakers includes a cover and a selection of breakers. It is UL listed for residential and commercial power distribution. This load center is built with a plated, aluminum bus bar that is tested and is compatible with Square D Homeline circuit breakers. Homeline load centers are designed for the value-minded contractors, remodelers, builders and homeowners. Square D Homeline breaker boxes are engineered for fast installation and wire savings.

• Square D Homeline 200 Amp 40-Space 80-Circuit Indoor Main Breaker Qwik-Grip Plug-On Neutral Load Center with Cover - Value Pack
• Innovative Qwik-Grip Design: Features a cable entry system that securely grips branch wires, eliminating the need for steel knockouts and cable connectors, ensuring faster and cleaner installations
• Plug-On Neutral Bar: Fully distributed neutral bar supports Homeline plug-on neutral combination arc fault breakers on any space, simplifying circuit customization
• Versatile Breaker Compatibility: Each pole space accepts full-size, tandem, or quad breakers for enhanced flexibility
• Ground and neutral bars accept up to (3) #10-14 equipment grounds flush/surface indoor cover
• Included Circuit Breakers: Includes (3) HOM120 20 Amp single-pole circuit breakers and (2) HOM230 30 Amp double-pole circuit breakers for added value and convenience
• Surge Protection Ready: Compatible with plug-on secondary surge arrestors (sold separately) to protect your electrical system
• Overhead or Underground Feed: Easily adaptable feed direction by rotating the device before installation
• Indoor Installation: Single-phase design rated at 120/240 VAC with a robust 22,000 AIR short circuit current rating
• Rated 120/240-Volt AC and 22,000 air short circuit current rating
• Automatic Flush Cover: Streamlined flush adjusting cover reduces installation time and effort
• Straight-In Mains Design: Saves on expensive cabling costs and reduces installation time
• Enhanced Wiring Flexibility: Distributed split branch neutral with pre-loosened terminal screws and up to 50% more terminals than UL requirements
• Durable and Reliable: Thermoplastic interior assembly ensures industry-leading ruggedness for long-lasting performance
• Easy Screw Installation: Slot/square drive screws accommodate both flat blade and square-head screwdrivers for proper torque and positive drive
• Theft-Resistant Interiors: Interiors can be quickly removed with a single captive screw for added protection during job site storage
• Customizable Grounding Options: Features 3 ground bar mounting locations (left, right, and end) for optimal wiring convenience

Specially designed for easy installation, Eaton's BR load centers house the branch circuit breakers and the wiring required to distribute power to individual circuits. This panel is a main lug panel which is used as sub-panel to add circuits to an existing main breaker panel. Sub panels are often used in a garage, home addition, barn or storage shed and/or workshop. The branch breakers protect the wires leading to individual electrical loads such as fixtures and outlets. The BR612L125SDP is a 125 Amp main lug with 6-spaces and 12-circuits.

• Amperage rating: 125 Amp
• Bus material: aluminum
• Rated NEMA 1 for indoor use
• Interrupt rating: 10 kAIC
• Mounting: surface
• Number of circuits: 12
• Number of spaces: 6
• Phase: single-phase
• Voltage rating: 120/240-Volt
• Wire size: #14-1/0 AWG Cu/Al at 60 degree C or 75 degree C
• Tangential center knockout easier installation for conduit applications
• Steel back pan provides solid and reliable breaker mounting single piece design for stability and durability
• Single keyhole mounting - provides easier mounting and leveling
• Drywall marking on enclosure - indicates proper mounting depth for flush applications
• Used with: type BR breakers

The Eaton Cutler-Hammer Type-BR Circuit Breaker Filler Plates allows you to cover unused spaces in a load center. This ensures that the live space is closed off. It is UL safety listed.

• Covers unused spaces in a load center
• For use with cutler-hammer type-BR load centers
• 1 in. plate for branch breaker slots
• UL listings

The Square D Homeline 125 Amp 24-Space 48-Circuit Indoor Convertible Main Lugs Load Center with cover for Plug-on Neutral breakers includes a ground bar and is UL listed for residential and commercial power distribution. This load center is built with a plated, aluminum bus bar that is tested and listed only for Homeline circuit breakers. Homeline load centers are designed for the value-minded contractors, remodelers, builders and homeowners. Homeline load centers are engineered for fast installation and wire savings.

• Includes a fully distributed neutral bar, allowing for the installation of Homeline plug-on neutral combination arc fault breakers on any space
• Each pole space accepts full-size, tandem or quad breakers
• Ground and neutral bars accept up to (3) #10-14 equipment grounds
• Includes a PK15GTAL ground bar, a combination flush/surface cover and is convertible to main breaker load center with a QOM1 main breaker (sold separately)
• Accommodates plug-on secondary surge arrestor (sold separately)
• Overhead/underground feed simply by rotating the device before installing
• Single phase
• Rated 120/240 VAC and 65,000 air short circuit current rating
• Automatic flush adjusting cover requires less time to complete the job
• Designed with straight-in mains to save expensive cable and time
• Distributed split branch neutral with terminal screws backed out offering with up to 50% more terminals than UL requires increases wiring flexibility saving installation time and simplifies wiring
• Thermoplastic interior assembly is among the most rugged in the industry
• Slot/square drive screws let you use either standard flat blade screwdriver or square-head driver for positive drive and proper torque
• For protection from damage or theft on the job site, interiors can be easily removed with a single captive screw
• 2-equipment ground bars are factory-included for field mounting in 3 locations (left, right and end) letting you pick the easiest spot to wire

For use on load centers, 125 Amp and lower. This device will prevent dangerous feedback between two power sources. Easy assembly requiring no modifications to the load center or meter combo.

• Utility main breaker types include MBK100A or MBK125A standby main breaker types include QP, QPH or HQPH
• Suitable for use with optional standby systems in accordance with article 702 of the NEC
• Corrosion resistant finish
• UL listed for use in most Siemens load centers and meter combos

Siemens PN Series Load Centers - a high quality and feature-rich line of load center products designed to meet applications for virtually every need. The PN Series load center provides maximum flexibility in combination with labor saving features to aid the contractor while installing the product. PN Series load centers accept the plug-on neutral breakers, patented insta-wire neutral/ground system, convertibility, copper bussing and mounting tabs on the trim - these features were specifically engineered to decrease installation time and increase flexibility.

• Features siemens plug-on neutral, for simple quick installation, that is spacious with over 4 in. of wire bending space, and a secure reliable installation method
• PN Series plug-on neutral load center includes 2 factory installed ground bars
• Single phase load center
• Tin plated copper bus
• NEMA Type 3R enclosure
• Grey trim
• Interrupt rating: 100000 AIC
• UL Listed

The Square D by Schneider Electric Homeline Value Pack 100 Amp 20-Space 40-Circuit Indoor Convertible Main Breaker Qwik-Grip Load Center for Plug-on Neutral breakers includes the cover, a selection of breakers and is UL listed for residential and commercial power distribution. This load center is built with a plated, aluminum bus bar that is tested and is compatible with Square D Homeline circuit breakers. Homeline load centers are designed for the value-minded contractors, remodelers, builders and homeowners. Square D Homeline breaker boxes are engineered for fast installation and wire savings.

• Square D Homeline 100 Amp 20-Space 40-Circuit Indoor Main Breaker Qwik-Grip Plug-On Neutral Load Center with Cover - Value Pack
• Innovative Qwik-Grip System: Features a revolutionary cable entry system that grips branch wires securely while eliminating steel knockouts and cable connectors for faster and easier installation
• Fully Distributed Neutral Bar: Designed for seamless installation of Homeline plug-on neutral combination arc fault circuit breakers on any space
• Flexible Breaker Compatibility: Each pole space supports full-size, tandem, or quad Homeline breakers, offering versatile circuit management
• Ground and neutral bars accept up to (3) #10-14 equipment grounds
• Comprehensive Value Pack: Includes (2) HOM120 20 Amp single-pole circuit breakers, (1) HOM230 30 Amp double-pole circuit breaker, and a combination flush/surface cover for added convenience
• Surge Protection Ready: Compatible with plug-on secondary surge arrestors (sold separately) for enhanced electrical safety
• Overhead/Underground Feed Options: Easily switch between overhead or underground feed by rotating the device during installation
• Single-Phase Breaker Box: Built for single-phase indoor applications
• High Electrical Rating: Rated 120/240 VAC with a 22,000 AIR short circuit current rating for reliable performance
• Time-Saving Features: Includes an automatic flush-adjusting cover and straight-in mains design to reduce installation time and save on cable costs
• Designed with straight-in mains to save expensive cable and time
• Enhanced Wiring Flexibility: Distributed split branch neutral offers up to 50% more terminals than UL requirements, simplifying wiring and increasing flexibility
• Durable and Rugged Design: Constructed with a thermoplastic interior assembly for long-lasting durability
• Convenient Fasteners: Slot/square drive screws allow the use of either a flat-blade or square-head screwdriver for secure fastening and proper torque
• Secure and Theft-Resistant: Interior components can be easily removed with a single captive screw, protecting them from damage or theft on job sites
• Versatile Ground Bar Mounting: Includes three ground bar mounting locations (left, right, and end) for optimal wiring convenience

This is a Type CH combination cover for select Type CH surge ready loadcenters. Eatons Type CH 3/4 in. load centers enclose CH breakers for power distribution and circuit protection in residential and light commercial applications. This loadcenter cover is rated NEMA 1 for indoor use.

• Combination cover for type CH surge loadcenters
• Cover is rated nema 1 for indoor use
• Please refer to the compatibility chart for Type CH loadcenters this cover will fit
• Type CH products have a lifetime limited warranty

Siemens PN Series Load Centers - a high quality and feature-rich line of load center products designed to meet applications for virtually every need. The PN Series load center provides maximum flexibility in combination with labor saving features to aid the contractor while installing the product. PN Series load centers accept the plug-on neutral breakers, patented insta-wire neutral/ground system, convertibility, copper bussing and mounting tabs on the trim - these features were specifically engineered to decrease installation time and increase flexibility.

• Features siemens plug-on neutral, for simple quick installation, that is spacious with over 4 in. of wire bending space, and a secure reliable installation method
• PN Series plug-on neutral load center includes 2 factory installed ground bars
• Single phase load center
• Tin plated copper bus
• NEMA Type 3R enclosure
• Grey trim
• Interrupt rating: 22000 AIC
• UL Listed